分析与监测

测定水中总氮时高空白吸光度的原因查找

展开
  • 深圳市水质检测中心, 广东 深圳 518036
曹蕾(1972- ),1997年毕业于华中师范大学,硕士研究生,工程师,目前主要从事水质检测工作.联系电话:0755-83071704,83071703(传真),13662585425.E-mail:caolei08@hotmail.com.

收稿日期: 2004-05-16

  网络出版日期: 2010-10-01

Fault analysis of the high absorbance of blank tests in the determination of the total nitrogen content in water

Expand
  • Shenzhen Water Quality Centre, Shenzhen 518036, China

Received date: 2004-05-16

  Online published: 2010-10-01

摘要

根据国家标准GB11894—1989测定地表水中的总氮时,发现了空白实验的吸光度异常偏高的现象。由于实验过程中,氧化剂的纯度、氧化溶液的放置时间、氧化时间的长短、蒸馏水的纯度、检测仪器的稳定性及实验环境等因素都会对空白实验的吸光度产生影响,因此,通过一系列对比实验,系统地检查了实验用水、试剂、器皿、全自动高压灭菌器和紫外可见分光光度计,对可能的影响因素逐一进行了分析和排除,找到了实验出现问题的原因,并进行了校正。

关键词: 总氮; 空白实验; 吸光度

本文引用格式

曹蕾, 何云飞 . 测定水中总氮时高空白吸光度的原因查找[J]. 工业水处理, 2005 , 25(1) : 54 -55 . DOI: 10.11894/1005-829x.2005.25(1).54

Abstract

According to GB 11894-1989, when the concentration of the total nitrogen in surface water is determined, the absorbance of the blank test is rather high. During the tests, the factors, such as the purity of oxidant, the deposited time of oxidation solution, the stability of experimental apparatus, the purity of distilled water, experi-mental environment, etc. bring negative influences on the experimental results. Through a series of contrast tests, the water in the tests, reagent, vessels, autoclave and ultraviolet visible spectrophotometry which have influences on the tests have been examined systematically one by one. The main causes for problems have been found out and adjustments have been made.

参考文献

[1] GB 11894-1989,水质总氮的测定碱性过硫酸钾消解紫外分光光度法[S].
[2] 徐晓春,黄小红,夏羽兰,等.降低总氮测定空白的方法改进[J].甘肃环境研究与监测,2003,16(1):44.
[3] 邵亚凤,过美蓉.测定总氮时影响空白吸光值的因素[J].环境污染与防治,2001,23(6):304.

文章导航

/