悬浮法聚氯乙烯生产废水处理技术应用与研究进展
收稿日期: 2004-11-22
网络出版日期: 2010-10-01
Study and application progress of technology to treat wastewater from polyvinyl chloride production by syspension
Received date: 2004-11-22
Online published: 2010-10-01
周长波, 张振家, 贾春峰 . 悬浮法聚氯乙烯生产废水处理技术应用与研究进展[J]. 工业水处理, 2005 , 25(3) : 1 -5 . DOI: 10.11894/1005-829x.2005.25(3).1
In the last decade, poluvinyl chloride(PVC)production is growing continuously.However,the processing of manufacturing PVC products requires excessive freshwater for its operation and discharges considerable quantities of wastewater.This creates a serious threat to the sorses of environment and fresh water supply.Therefore,it is necessary of wastewater from PVC are introduced briefly,then the state and progress of technology to treat such wastewater in China and abroad are summarized,and thee engineering application and research,and furthermore,some successsful processes are introduced in detail. The contact oxidation _ozonation process is proposed as the dominant process in treating and reusing the mother liquid of PVC.
Key words: polyvinyl chloride; wastewater; biochemical treatment
[1] 徐兆瑜.聚氯乙烯生产、市场和技术新进展[J].塑料,2004,33(1):64-69.
[2] 伍桂松.我国聚氯乙烯市场分析及预测[J].化工技术经济,2000,18(5):20-22.
[3] 刘岭梅.悬浮聚氯乙烯工程技术进展[J].化工生产与技术,1999,(1):33-35.
[4] 王权.臭氧氧化法在悬浮法聚氯乙烯母液处理中的应用[J].中国氯碱,2001,(5):42-43.
[5] 李茂双,等.聚氯乙烯废水处理及回用研究[J].齐鲁石油化工,2001,29(3):211-214.
[6] Carroll W F J, et al. Characterization of emissions of dioxins and furans from ethylene dichloride(EDC), vinyl chloride(VCM) and polyvinylchloride (PVC) manufacturing facilities in the United States. I. Resin, treated wastewater, and ethylene dichloride [J].Chemosphere, 1998, 37(9-12): 1 957-1 972.
[7] 王振欧,华树森,李慧敏.物化法治理聚氯乙烯废水的工程实践[J].中国氯碱,2004,(1):43-45.
[8] 王成琼.浅谈氯碱工业废水的回收利用[J].贵州化工,2002,27(2):22-24.
[9] 郑雪梅.氯碱工业和PVC工业废水处理中填料的选型[J].氯碱工业,2000,(4):52-53.
[10] 蔺俊慈.改造PVC生产离心干燥工艺[J].聚氯乙烯,2003,(3):19-32.
[11] 郝利,赵予生,阳志刚.综合治理"三废"实现清洁化生产[J].氯碱工业,2002,(7):30-32.
[12] 宋容宝,杨庆红.浅谈PVC清洁生产[J].聚氯乙烯,2001,(4):16-19.
[13] 张国臣,等.PVC生产过程中节能降耗的有效途径[J].聚氯乙烯,2002,(4):55-58.
[14] 朱发奎.PVC浆料离心母液循环使用[J].聚氯乙烯,1996,(5):19-20.
[15] 张宏宇.浅谈我公司PVC树脂生产中节能降耗的措施[J].聚氯乙烯,2003,(3):54-56.
[16] 贾卓,厉喜军.离心母液水与系统热源的综合利用[J].化工时刊,2003,17(7):46-48.
[17] 张甲杲,李怀顺,张亚东.PVC离心母液综合利用[J].聚氯乙烯,2003,(1):61.
[18] 李永定.PVC废水生化处理回用技术[J].天津科技,2004,(1):34.
[19] 周长波,李永定,张振家.悬浮法PVC离心母液的处理及回用实例[J].中国给水排水,2005,(4):82-84.
[20] Scruqqs C E,Randall C W. Evaluation of filamentous microorganism growth factors in an industrial wastewater activated sludge system[J]. Water Science and Technology, 1998, 37 (4-5) :263 -270.
[21] Schonberger H, et al. Study of microbial degradation of polyvinyl alcohol (PVA) in wastewater treatment plants[J]. American Dyestuff Reporter, 1997,86(8) :9- 18.
[22] 欧阳雄,张树生.BT-1凝聚剂处理印染废水[J].染整科技,1997,(1):37-40.
[23] 盛季陶.PVA退浆废水预处理研究[J].东华大学学报(自然科学版),2002,28(1):101-104.
[24] 陈美娟.臭氧技术及其在水处理应用中的探讨[J].机电设备,2002,(4):28-31.
[25] 赵国华,谢栋,耿政松,等.高浓度臭氧用于污水处理的研究[J].工业水处理,2002,22(9):1-5.
[26] 冀滨弘,章非娟.臭氧技术及其在水处理中的应用[J].污染防治技术,1997,10(4):191-194.
[27] 张忠祥.关于有机化学污染物与有机化工废水的生物毒性及生物降解性的初步研究[J].化工环保,1984,4(4):211-218.
[28] 王桂华.用离心母液替代脱盐水生产PVC树脂小试获得成功[J].聚氯乙烯,1998,(2):37-39.
[29] 周长波,杨华伟,张振家.厌氧-好氧法处理悬浮法PVC离心母液的研究[J].化工环保,2005,(1):40-43.
[30] 周长波,周蕴,张振家.悬浮法聚氯乙烯(PVC)化工离心母液的生化处理中试研究[J].环境科学,2005,26(3):10-13
/
〈 | 〉 |