试验研究

DX-10对Cu2+废水处理研究

展开
  • 中南大学化学化工学院, 湖南长沙 410083
刘有才(1970- ),1994 年毕业于中南工业大学,2001年获昆明理工大学冶金物理化学硕士,2002 年中南大学在读博士研究生,讲师。电话:0731-8876181,E-mail: hxhgygb@mail.csu.edu.cn

收稿日期: 2005-06-23

  网络出版日期: 2010-10-01

Application of DX- 10 to the treatment of Cu2+ containing was tewater

Expand
  • College of Chemistry & Chemical Engineering, Central South University, Changsha 410083, China

Received date: 2005-06-23

  Online published: 2010-10-01

摘要

化工冶金研究所采用国产化工原料合成了DX-10,用DX-10进行了用量试验、pH、动力学试验、离子浓度对交换容量影响试验、DX-10含硫量对交换容量的影响和残渣稳定性试验,用DX-10处理含铜废水取得了良好的效果。

本文引用格式

刘有才, 钟宏 . DX-10对Cu2+废水处理研究[J]. 工业水处理, 2005 , 25(10) : 36 -38 . DOI: 10.11894/1005-829x.2005.25(10).36

Abstract

DX - 10 has been synthesized with domestic chemical raw materials by the Institute of Chemical Metallurgy. By using DX- 10,tests for dosage,pH value,dynamics, ion concentration effect on exchange capacity and the effect of S-content in DX - 10 on exchange capacity and residue stability have been carried through.Treating Cu2+containing wastewater with DX- 10 has got pretty good results.

参考文献

[1]徐根良,等. 重金属废水处理技术综述[J]. 水处理技术,1991,17 (2):58- 77
[2]辽宁石油化工技术情报总站. 化工三废治理技术[M]. 沈阳:辽宁环境科学学会,1983. 21- 24
[3]黄继国.重金属废水处理技术综述[J].世界地质,1999,18(4):83- 86
[4]周本省.工业水处理技术[M].北京:化学工业出版社,1997.152- 157
[5]梁仲智,等. 电镀废水气脱液机[J]. 电镀与环保,1983,3(1):29- 30
[6]冯步铨,等. 反喷淋法治理电镀焦磷酸盐铜锡镍废水[J]. 电镀与环保,1984,4(2):29- 31
[7]何生龙. 电镀史话[J]. 电镀与环保,1985,5(3):33- 36
[8]化学工业部环境保护设计技术中心站. 化工环境保护设计手册[M]. 北京:化学工业出版社,1998. 6
[9]Wing R E,et al. Styrene of three methyl radical ammonia chloride salt[J]. J. WPCF,1994,46(8):2 043- 2 081
[10]徐旭. 污泥硫化床焚烧产物的重金属排放特性研究[J]. 环境工程,1999,(6):15- 17
[11]李炎,等. 不溶性交联淀粉黄原酸酯处理工业废水重金属离子的研究[J]. 湖南化工,1980,10(4):1- 13
文章导航

/