试验研究

杂环类制药废水处理工艺探讨

展开
  • 1. 东华大学环境科学与工程学院, 上海 200051;
    2. 深圳燃气集团, 广东深圳 518001;
    3. 上海诺华制药公司, 上海 200030
黄永辉(1968- ), 东华大学环境工程专业在读博士生, 主要从事工业废水处理研究。联系地址:上海市东华大学334 信箱, 电话:(021)62374623

收稿日期: 2000-01-13

  网络出版日期: 2010-10-01

The studies on the treatment process of pharmaceutical wastewater

Expand
  • 1. College of Environmental Science and Engineering, East China University, Shanghai, 200051 China;
    2. Shenzhen Gas-fueled Group, Shenzhen 518001, China;
    3. Shanghai Novartis Co., Ltd, Shanghai 200030, China

Received date: 2000-01-13

  Online published: 2010-10-01

摘要

通过对某制药厂杂环类制药废水处理工艺的考察,确定了处理该废水的最佳方案。首先对该废水进行冷却结晶,盐分析出率最高达70 %左右 ;然后用Fenton试剂对其进行氧化处理,可使TOC去除率达到50 %以上,可生化性达 0.6左右 ;最后用活性污泥法对该废水进行生化处理,可使出水指标达到国家排放标准。

本文引用格式

黄永辉, 吕军献, 王川 . 杂环类制药废水处理工艺探讨[J]. 工业水处理, 2001 , 21(1) : 29 -30,36 . DOI: 10.11894/1005-829x.2001.21(1).29

Abstract

In this paper,a new kind of t reatment process used to t reat pharmaceutical wastewater is described in detail,and the optimal scheme to t reat pharmaceutical w astew ater is also determined.Fi rst ly the w astew ater is cooled and crystallized in order to deposi t salt, and the removal ef ficiency of salt is about 70 %.Seco ndly, the wastewater w as oxy genated by Fenton reagent.As the result, the removal ef ficiency of TOC is about 60 % and the value of BOD/COD is about 0.6.Finally, the wastewater is biochemically treated by activated sludge process, and the parameter of eff luent can meet the Government Discharging Standard.

参考文献

[1] 陈季华, 奚旦立, 杨大通.废水处理工艺设计与实例分析[M].北京:高等教育出版社, 1993.
[2] 刘大顺, 喻俊芳.水质分析化学[M].武汉:华中理工大学出版社, 1988.

文章导航

/