经验交流

厌氧酸化—SBR法处理甲醛废水

展开
  • 1. 南华大学建筑工程系, 湖南 衡阳 421001;
    2. 湖南省衡阳市规划设计院, 湖南 衡阳 421001
于霞( 1978- ), 女, 中南大学在读硕士研究生, 现从事细胞固定化技术处理金属废水的研究工作。

收稿日期: 2001-01-11

  网络出版日期: 2010-10-01

Treatment of formaldehyde wastewater by anaerobic acidification- SBR process

Expand
  • 1. Dept. of Architec. Eng., Nanhua University, Hengyang 421001, China;
    2. Hengyang Planning and Design Institute, Hengyang 421001, China

Received date: 2001-01-11

  Online published: 2010-10-01

摘要

采用厌氧酸化—SBR法处理甲醛废水。在反应期厌氧段,采用中高温生物催化酸化,对季戊四醇、甲醛废水进行初级降解(将复杂分子转化为简单分子)在反应好氧段,进一步降解上一阶段的水解产物,运行结果表明,BOD5负荷0.04~0.08kg/(kgMLSS·d),甲醛负荷0.011~0.022kg/(kgMLSS·d),当反应期厌氧段为20h,好氧段为11h时,甲醛去除率可以达到8%,CODCr去除率90%以上。

本文引用格式

熊正为, 彭丽华 . 厌氧酸化—SBR法处理甲醛废水[J]. 工业水处理, 2001 , 21(10) : 38 -40 . DOI: 10.11894/1005-829x.2001.21(10).38

Abstract

SBR process ( the combination of anaerobic phase with aerobic phase) is used to treat formaldehyde wastewater.In anaerobic phase,C5H8(OH)4 and formaldehyde wastewater are degraded primarily by middle- high temperature biological catalyt ic acidification, and the hydrolysate of the above phase is further degraded in aerobic phase. The results show that the removal rate of formaldehyde can be 98% and the removal rate of CODCr is more than 90%. BOD5 load rang is from 0.04 to 0.08 kg/ ( kgMLSS?d) formaldehyde load rang is from 0. 011 to 0. 022 kg/ ( kg MLSS·d), anaerobic reaction time is 16 hours and aerobic reaction t ime is 11 hours.

参考文献

[1] 杨琦,钱易.味精废水的SBR处理研究[J].给水排水,2000,26(1):54~55.
[2] 赵永才.SBR法处理麦芽生产废水[J].给水排水,2000,26(5):31~32.

文章导航

/