试验研究

含油乳化废水处理技术研究

展开
  • 深圳市工业废物处理站, 广东 深圳 518049
第一作者郭玉华, 1966 年生, 1991 年毕业于长春应用化学研究所, 获硕士学位, 工程师。

收稿日期: 1999-07-20

  网络出版日期: 2010-10-01

Technological study on the treatment of oi-l bearing and emulsifying wastewater

Expand
  • Shenzhen Industrial Waste Treatment Station, Shenzhen 518049, China

Received date: 1999-07-20

  Online published: 2010-10-01

摘要

采用氧化、隔油—絮凝—吸附法对金属制品厂含油乳化废水进行处理,结果表明:在适宜的处理条件下,该法可有效地去除水中COD和油,去除率分别为 98.6%和 97.9%,Ni2+离子去除率达 100%。

本文引用格式

郭玉华, 吴小令, 郑建涛, 陈志传 . 含油乳化废水处理技术研究[J]. 工业水处理, 2000 , 20(5) : 28 -30 . DOI: 10.11894/1005-829x.2000.20(5).28

Abstract

The experimental treatment of oi-l bearing and emulsifying wastewater from metal producing plants is conducted using oxidation, separation of oil, flocculation and adsorption processes. The experimental results shows that, under the appropriate conditions, the total removal efficiencies of the COD and oil are 98.6% and 97.9% respectively. The nickel could not be detected.

参考文献

[1] 李惠民.含油废水处理方法[J].化工环保,1998,18(3):146~149.
[2] 谢振国,刘真让.含油废水处理技术[J].污染防治技术,1999,12(1):29~32.
[3] 国家环保局水和废水监测分析方法编委会.水和废水监测分析方法[M].(第3版).北京:中国环境科学出版社,1989.
[4] 樊彩梅,余华端.含荧光渗透剂废水的处理[J].化工环保,1998,18(3):158~160.

文章导航

/