乳化液废水处理工程的设计实例

黄永平, 李杰, 郭殿乙, 李锡柱, 张泉海, 梁志农, 孟海江

doi:10.11894/1005-829x.2002.22(12).60

工业水处理 >

2002 , Vol. 22 >Issue 12: 60 - 62

DOI: https://doi.org/10.11894/1005-829x.2002.22(12).60

经验交流

乳化液废水处理工程的设计实例

展开

1. 合肥绿寰环境工程有限公司, 安徽合肥　230022;
2. 天津钢管公司, 天津　300301

黄永平(1973- ),1998年毕业于合肥工业大学,助理工程师.联系电话:0551-3521888-8015.

收稿日期: 2002-06-01

网络出版日期: 2010-10-01

收起

A design example of the treatment of emulsified wastewater

Expand

1. Hefei Luhuan Environmental Engineering Company, Hefei 230022, China;
2. Tianjin Steel Pipe Co., Ltd., Tianjin 300301, China

Received date: 2002-06-01

Online published: 2010-10-01

Fold

摘要

对天津钢管公司管加工厂排放的乳化液废水和磷化锌废水的原有处理工艺进行了改造，采用隔油-破乳-气浮-混凝沉淀-过滤等工艺处理后，可达标排放，且对纯乳化液废水也能单独处理。

关键词： 乳化液废水; 磷化锌废水; 破乳; 气浮; 混凝沉淀

本文引用格式

黄永平, 李杰, 郭殿乙, 李锡柱, 张泉海, 梁志农, 孟海江 . 乳化液废水处理工程的设计实例[J]. 工业水处理, 2002 , 22(12) : 60 -62 . DOI: 10.11894/1005-829x.2002.22(12).60

Abstract

The treatment of emulsified wastewater and Zn3(PO4)2 wastewater from the processing factories of Tianjin Steel Pipe Co.,Ltd.is introduced.The previous technologies such as separating oil,demulsification,air floatation,coagulation sedimentation,filtration and so on have been reformed.The results show that the discharge meets the relevant standards.In addition,the emulsified wastewater can also be treated by the above process.

Key words： emulsified wastewater; Zn₃(PO₄)₂ wastewater; demulsification; air floatation; coagulation sedimentation

Options

文章导航

模态框（Modal）标题

摘要

本文引用格式

Abstract