工程设计与设备

A/O+A/O两级生物接触氧化工艺处理工业区废水

展开
  • 1. 南京大学城市与资源学系, 江苏南京 210093;
    2. 南京理工大学环境科学与工程系, 江苏南京 210094
张丽(1972- ),1996年毕业于昆明理工大学环境工程系,现就读于南京大学城市与资源系环境科学专业,在读硕士生.联系电话:025-3595528.

收稿日期: 2002-04-06

  网络出版日期: 2010-10-01

Application of A/O+A/O biological contacted oxidation process to the wastewater treatment in industrial districts

Expand
  • 1. Resource and Urban Department, Nanjing University, Nanjing 210093, China;
    2 Environmental Science and Engineering Department, Nanjing University of Technology, Nanjing 210094, China

Received date: 2002-04-06

  Online published: 2010-10-01

摘要

以如皋某工业区废水处理中心为例,介绍了A/O+A/O两级强化生物接触氧化工艺处理工业区废水的工程设计。设计处理规模为20000m3/d,进水COD为500mg/L,处理后出水达国家一级排放标准,并在两级A/O强化池中构建了生态系统,为工业区废水的综合治理和利用提供了一条较好的途径。

本文引用格式

张丽, 窦贻俭, 安立超 . A/O+A/O两级生物接触氧化工艺处理工业区废水[J]. 工业水处理, 2003 , 23(1) : 62 -64 . DOI: 10.11894/1005-829x.2003.23(1).62

Abstract

An industrial wastewater treatment center in Rugao is taken as an example.The engineering design of A/O+A/O couple strengthening biological contacted oxidation process for the wastewater treatment in industrial districts is introduced. The scale of this treatment design is 20 000 m3/d, and the inlet water COD is 500 mg/L. After the treatment,the outlet water can reach the first grade of discharge standard of China. Besides, an ecological system has been set up in the A/O couple strengthening pond, providing a good approach to the comprehensive control and utilization of industrial district wastewater.

文章导航

/