Preparation of FMA flocculant and its effect on the flocculating properties in printing and dyeing wastewater
Received date: 1999-05-28
Online published: 2014-10-08
This paper presents a new type of complex flocculant FMA ,which is prepared by using aluminium hydroxide,ferric chloride,magnesium chloride and hy drochloride acid as raw materials, and studies flocculating properties of FMA and other three flocculants in printing and dyeing wastewater.The results show that FMA flocculant is superior to the other three flocculants and completly suited to treat printing and dyeing wastewater.The dosage of FMA is 50 ~ 70 mg/ L
DANG Yousheng, GUO Yan, LU Fengji . Preparation of FMA flocculant and its effect on the flocculating properties in printing and dyeing wastewater[J]. Industrial Water Treatment, 2000 , 20(1) : 19 -21 . DOI: 10.11894/1005-829x.2000.20(1).19
[1] 姚重华.混凝剂与絮凝剂[M].北京:中国环境科学出版社,1991:13~20.
[2] 智修德.给水排水常用数据手册[M].北京:中国建筑工业出版社,1997:93~ 98.
[3] 高宝玉等.PACS 絮凝剂的制备及其性能研究[J].环境科学,1990,11(3):34~37.
[4] 孙剑辉等.絮凝剂 PFCS 的制备及其性能研究[J].环境科学,1996,17(4):59~61.
[5] 刘万毅等.复合絮凝剂 PAFCS 的絮凝研究[J].工业水处理,1996,16(4):29~30.
[6] 田宝珍等.铝铁共聚复合絮凝剂的研制及应用[J].工业水处理,1998,18(1):17~19.
/
〈 |
|
〉 |