结合工程实例浅淡&ldquo;如何满足喷水织机对水的电导率要求&rdquo;

doi:10.11894/1005-829x.1997.17(3).40

工业水处理 ›› 1997, Vol. 17 ›› Issue (3): 40-42,46. doi: 10.11894/1005-829x.1997.17(3).40

结合工程实例浅淡“如何满足喷水织机对水的电导率要求”

周红梅

中国纺织工业设计院, 北京 100037

收稿日期:1996-12-16 出版日期:1997-05-20 发布日期:2014-08-22
作者简介:作者周红梅，女，生于1962年，1985年毕业于哈尔滨建筑大学，现为中国纺织工业设计院工程师。

HOW TO MEET THE WATER CONDUCTIVITY REQUIREMENT TO WATER - JET LOOM - COMBINING WITH AN ENGINEERING EXAMPLE

Zhou Hongmei

China Textile Industrial Engineering Institute, Beijing 100037

Received:1996-12-16 Online:1997-05-20 Published:2014-08-22

摘要/Abstract

摘要：

喷水织机要求其使用的水电导率在130～300μs/cm之间。结合一工程实例，通过分析和计算，对水处理方案进行了可行性研究。

Abstract:

The water-jet loom requires the water conductivity used should be at the range in 130～300μs /cm. Combining with an engineering example, the practicability investigation of water treatment has been done through a nalysis and calculation.

周红梅. 结合工程实例浅淡“如何满足喷水织机对水的电导率要求”[J]. 工业水处理, 1997, 17(3): 40-42,46.

Zhou Hongmei. HOW TO MEET THE WATER CONDUCTIVITY REQUIREMENT TO WATER - JET LOOM - COMBINING WITH AN ENGINEERING EXAMPLE[J]. INDUSTRIAL WATER TREATMENT, 1997, 17(3): 40-42,46.