分析与监测

非分散红外测油法中S-316和CCl4两种萃取剂的应用研究

展开
  • 上海宝山钢铁股份有限公司钢管分公司能源车间, 上海 201900
李建新(1975- ),1997年毕业于东北大学机械学院,助理工程师.电话:021-26645429.

收稿日期: 2001-02-06

  网络出版日期: 2010-10-01

Researches on the application of extraction solvents S- 316 and CCl4 to the non-dispersive infrared analysis

Expand
  • Energy Source Workshop of Steel Tube Branch, Baoshan Iron and Steel Stock Co., Shanghai 201900, China

Received date: 2001-02-06

  Online published: 2010-10-01

摘要

就 S- 316 (氯化三氟乙烯 )和 CCl4(四氯化碳 )两种萃取剂在非分散红外测油法中的应用进行探讨、分析。通过对使用两种萃取剂 (S- 316和 CCl4)方法的线性、精密度、检出限及回收率的比较,结果表明,在测油仪标定满刻度 2~ 2 0 0 m g/L 范围内成线性,测量精度 1%左右,检出限为 0 .1m g/L,加标回收率达到 85 %以上。在严格控制萃取剂纯度和分析操作的条件下,使用两种萃取剂所得结果一致,完全满足现场测油的精度。但使用 CCl4的成本远低于 S- 316,在用非分散红外法测水中含油量中有很高的实用价值,在环境监测中有着广阔的应用前景。

本文引用格式

李建新 . 非分散红外测油法中S-316和CCl4两种萃取剂的应用研究[J]. 工业水处理, 2001 , 21(7) : 33 -37 . DOI: 10.11894/1005-829x.2001.21(7).33

Abstract

Experimental researches are made on the application of two extraction solvents S- 316( a polymer of chlorot rif luoroethylene) and CCl4 to the non-dispersive infrared analysis. By the comparison of the linearity, the measuring accuracy and the delect ion-limit,it shows that if the conditions of the operation and the purity of the ex traction solvent are cont rolled strictly,the result s must be the same: in the area of 2~200 mg/ L demarcated by the instrument it is linear; the measuring accuracy is about 1%, the detection limit is 0.1 mg/ L, and the recovery rate is over 85% .The demand in pract ice will be met entirely. But by the use of ext raction solvent CCl4, the cost is much less than that of extraction solvent S - 316. This method has a great value in the determination of oil-bearing amount in water, having wide use prospects in the environmental monitoring.

参考文献

[1] 李绍英.环境污染与监测[M].哈尔滨:哈尔滨工程大学出版社,1999.
[2] 胡声闻.溶剂手册[M].北京:化学工业出版社,1996.
[3] 李文融.循环冷却水处理手册[M].天津:天津科学技术出版社,1991.

文章导航

/