Discussion of the design for the production wastewater treatment engineering of the surfactant

Expand
  • College of Industry Equipment and Control Engineering, South China University of Technology, Guangzhou 510640, China

Received date: 2002-06-21

  Online published: 2010-10-01

Abstract

The paper introduces the design and application of treatment engineering to the production wastewater of the surfactant, which incorporate foam separation, coagulation sedimentation and biochemical treatment. After the coagulation experiment on the production wastewater treatment of surfactant, PAC is chosen as the coagulant for treating the wastewater,and the reduction is 71%~80%. After preliminary running, it shows that the wastewater treatment system is characteristic of little holding area, good treatment effect, low running expense, simple management. It is feasible and has very good referential value for similar production wastewater and similar surfactant wastewater. An idea of integrating coagulation factor and sedimentation tank to one, according to the circumstance of the local engineering is put forward.

Cite this article

Wu Jiandong, Wang Zhenyou, Zhou Xingqiu . Discussion of the design for the production wastewater treatment engineering of the surfactant[J]. Industrial Water Treatment, 2003 , 23(1) : 55 -57 . DOI: 10.11894/1005-829x.2003.23(1).55

References

[1] 祁梦兰.我国合成洗涤剂治理技术研究[J].中国环境科学,1994,(4):296-302
[2] 夏余庆.合成洗涤剂废水处理工艺的探讨[J].石油化工环境保护,1994,(4):23-26
[3] 李轶,王栋,周集体.我国表面活性剂LAS废水处理技术进展[J].环境污染治理技术与设备,2000,2(1):65-71
[4] 张希衡.水污染控制工程[M].北京:冶金工业出版社,1993.51

Outlines

/