工业水处理 ›› 2003, Vol. 23 ›› Issue (2): 75-76. doi: 10.11894/1005-829x.2003.23(2).75

• 经验交流 • 上一篇    下一篇

一种新的自动式浮油回收机的研究与应用

王东   

  1. 沈阳自动控制研究设计院环保工程事业部 辽宁沈阳 110015;
  • 收稿日期:2002-10-12 出版日期:2003-02-20 发布日期:2010-10-01
  • 作者简介:王东(1955- ), 1984 年毕业于沈阳重型机械工业学院, 工程师。电话:024-24505950

Researches on and application of the new floating oil recovery equipment

Wang Dong   

  1. Environmental Engineering Department, Shenyang Automatic Control Research & Design Academy, Shenyang 110015,China
  • Received:2002-10-12 Online:2003-02-20 Published:2010-10-01

摘要:

介绍了一种由水界面检测传感器、油界面检测传感器,通过可编程逻辑控制器(PLC)控制的新型浮油回收机。该机与原有技术相比,可根据现场实际情况来设定工作程序,决定排水泵或排油泵的工作状态,能自动排水。无需专人看管,达到自动控制的目的。

关键词: 浮油回收机, 检测传感器, 可编程逻辑控制器, 自动排水

Abstract:

This is a new floating oil recovery equipment which consists of the water interface testing sensor,oil interface sensor,and is controlled by PLC .Compared with the dated technique, the equipment has the advantages as follows:The program can be set according to the site conditions to control the work status of the draining pump and oil-discharging pump.It can discharge the water and oil automatically without any monitors.

Key words: floating oil recovery equipment, testing sensor, programming logical controller, automatic water draining

中图分类号: