工业水处理 ›› 2005, Vol. 25 ›› Issue (11): 55-56. doi: 10.11894/1005-829x.2005.25(11).55

• 经验交流 • 上一篇    下一篇

冷轧薄板循环水处理配方的筛选与应用

张惠欣1, 金秀红2, 孙文暖3, 顾占昌4   

  1. 1. 河北工业大学化工学院, 天津 300130;
    2. 天津化工研究设计院, 天津 300131;
    3. 烟台市城市排水管理处, 山东烟台 264000;
    4. 唐山钢铁股份有限公司动力厂, 河北唐山 063016
  • 收稿日期:2005-06-16 出版日期:2005-11-20 发布日期:2010-10-01
  • 作者简介:张惠欣( 1965- ) , 1987 年毕业于南开大学, 硕士, 高级工程师。

Selection of the formula of circulating water treatment in cold rolling thin plate production and its application

Zhang Huixin1, Jin Xiuhong2, Sun Wennuan3, Gu Zhanchang4   

  1. 1. College of Chemical Engineering, Hebei University of Technology, Tianjin 300130, China;
    2. Tianjin Research and Design Institute of Chemical Industry, Tianjin 300131, China;
    3. Yantai Disposal Administrative Division, Yantai 264000, China;
    4. Power Plant of Tangshan Iron and Steel Co. , Ltd. , Tangshan 063016, China
  • Received:2005-06-16 Online:2005-11-20 Published:2010-10-01

摘要:

针对冷轧薄板厂循环冷却水水质条件和特点,通过阻垢试验、腐蚀试验及动态模拟试验,筛选出具有较好缓蚀阻垢性能的缓蚀阻垢剂。经过1年的应用,结果表明,试验筛选出的配方具有很好的缓蚀阻垢性能。

关键词: 循环冷却水, 阻垢, 缓蚀

Abstract:

Aiming at the water quality conditions of circulating cooling water and its characteristics in cold rolling thin plate production, and through scaling test, corrosion test and dynamic simulating test, the corrosion and scale inhibitors are selected. After one year’s application, the results showthat the selected formula has very good scale and corrosion inhibiting performances.

Key words: circulating coolingwater, scale inhibition, corrosion inhibition

中图分类号: