工业水处理 ›› 2014, Vol. 34 ›› Issue (2): 62-64,80. doi: 10.11894/1005-829x.2014.34(2).062

• 试验研究 • 上一篇    下一篇

A/O 工艺污泥胞外聚合物和微生物疏水性的比较研究

畅丹, 仝攀瑞, 高占尧   

  1. 西安工程大学环境与化学工程学院, 陕西西安 710048
  • 收稿日期:2013-11-08 出版日期:2014-02-20 发布日期:2014-02-24
  • 作者简介:畅丹(1988-),硕士。电话:15929772952,E-mail:changdancd@126.com

Comparative study on sludge extracellular polymer and microorganism hydrophobic nature by A/O process

Chang Dan, Tong Panrui, Gao Zhanyao   

  1. School of Environmental and Chemical Engineering, Xi'an Polytechnic University, Xi'an 710048, China
  • Received:2013-11-08 Online:2014-02-20 Published:2014-02-24

摘要:

通过模拟水解酸化-好氧工艺,并以模拟印染废水为处理对象,比较分析了50%与80% 的回流比下,水解酸化池与好氧池中污泥胞外聚合物与微生物疏水性的变化,探讨了最适回流比。结果表明,回流比为80%的工艺的污泥胞外聚合物、微生物疏水性及污泥性质优于回流比为50%的工艺。

关键词: 胞外聚合物, 疏水性, 化学需氧量, 污泥性质

Abstract:

Stimulated printing and dyeing wastewater has been treated by hydrolysis acidification-aerobic process. The changes of sludge extracellular polymers and microorganism hydrophobic nature in hydrolysis acidification pool and aerobic pool when reflux ratios are 50% and 80%, respectively, are compared. The optimal reflux ratio is discussed. The results show that when reflux ratio is 80%, the sludge extracellular polymer and microorganism hydrophobic nature are superior to that when reflux ratio is 50%.

Key words: extracellular polymer, hydrophobic nature, chemical oxygen demand, sludge properties

中图分类号: