摘要：

针对难处理的含油污水，以丙烯酰胺（AM）和丙烯酰氧乙基二甲基苄基氯化铵（DBC）为单体，通过反相微乳液聚合方法合成了疏水缔合型阳离子聚合物P（AM-DBC），并进行红外光谱表征。考察了单体质量比、引发剂用量、反应温度、反应时间对P（AM-DBC）分子质量和转化率的影响，并将P（AM-DBC）应用于辽河油田含油污水的絮凝实验，结果表明P（AM-DBC）阳离子度约为9%、相对分子质量为400万左右时絮凝效果最佳，投加量为20 mg/L时除油率达到97%，浊度去除率为95%。

关键词: 聚丙烯酰胺, 絮凝, 含油污水

Abstract:

Aiming at the refractory oil-bearing wastewater,hydrophobic associative cationic polymer polyacrylamide P(AM-DBC) has been synthesized by reverse microemulsion polymerization method,using acrylamide(AM) and N,N-dimethyl-N-acryloyloxyethyl-N-benzyl ammonium chloride(DBC) as cationic monomers,and characterized by infra-red spectrometry. The influences of conditions,such as monomer mass ratio,initiator dosage reaction temperature,reaction time on the molecular mass and conversion rate of P(AM-DBC) are investigated. P(AM-DBC) is applied to the flocculation experiments for oil-bearing wastewater treatment in Liaohe Oilfield. The results show that when the cationicity of P(AM-DBC) is about 9% and relative molecular mass around 4 million,the flocculating effect is the best. When the dosage is 20 mg/L,the oil removing rate reaches 97%,and turbidity removing rate is 95%.

Key words: polyacrylamide, flocculation, oil-bearing wastewater

中图分类号: 

• TQ314.2