INDUSTRIAL WATER TREATMENT ›› 2018, Vol. 38 ›› Issue (7): 40-45. doi: 10.11894/1005-829x.2018.38(7).040

Previous Articles     Next Articles

Influences of pH on the structure and photo-catalytic capability of hydrothermal synthesized Bi2WO6

Zhang Xianghui   

  1. Henan Province Key Laboratory of Electromagnetic Transformation and Detection, College of Physics and Electronic Information, Luoyang Normal University, Luoyang 471934, China
  • Received:2018-04-25 Online:2018-07-20 Published:2018-08-02

pH对水热合成Bi2WO6的结构和光催化性能的影响

张相辉   

  1. 洛阳师范学院物理与电子信息学院, 河南省电磁变换与探测重点实验室, 河南洛阳 471934
  • 作者简介:张相辉(1983-),博士,讲师。E-mail:zxhlynu@163.com。
  • 基金资助:
    国家自然科学基金项目(51471082,61404071);河南省高等学校重点科研项目(15A430001);洛阳师范学院国家级基金培育项目(2014-PYJJ-002)

Abstract: Bi2WO6 nano-materials have been synthesized by one step hydrothermal method at 160℃,using Bi(NO3)3·5H2O and Na2WO4·2H2O as raw materials,NaOH as pH regulator,and the prepared Bi2WO6 materials characterized. The influences of predecessor pH on the photo-catalytic capabilities of Bi2WO6 nano-materials have been investigated. The results indicate that pH has comparatively great influences on all the phase structure,optical property,specific surface area and photocatalytic capability of the prepared Bi2WO6 samples. When pH=9,the Bi2WO6 photo-catalytic effect is the best. After being irradiated for 120 min under xenon lamp,the MB degradation rate reaches 80.9%,and after being irradiated for 180 min,RhB degradation rate reaches 84.7%.

Key words: Bi2WO6, hydrothermal method, photo-catalytic capability

摘要: 以Bi(NO33·5H2O和Na2WO4·2H2O为原料,NaOH为pH调节剂,采用一步水热法在160℃合成出了Bi2WO6纳米材料,对所制备Bi2WO6材料进行了表征。并考察了前驱物pH对Bi2WO6材料光催化性能的影响。结果表明,pH对制得Bi2WO6样品的晶相结构、光学性质、比表面积以及催化性能都有较大影响。pH=9时,Bi2WO6光催化效果最佳,在氙灯照射120 min后,MB的降解率达到80.9%,照射180 min后,RhB的降解率达到84.7%。

关键词: Bi2WO6, 水热法, 光催化性能

CLC Number: