INDUSTRIAL WATER TREATMENT ›› 2007, Vol. 27 ›› Issue (6): 69-72. doi: 10.11894/1005-829x.2007.27(6).69

Previous Articles     Next Articles

Hydraulic calculation and the analysis of the water surface curved line in the rectangular distributing water trough of sedimentation of inlet water at periphery

Zhang Zhizheng, Su Jing, Wang Yi   

  1. Xi’an University of Architecture & Technology, Xi’an 710055, China
  • Received:2006-10-17 Online:2007-06-20 Published:2010-10-01

矩形均匀配水槽的水面曲线分析与水力计算

张志政, 苏静, 王毅   

  1. 西安建筑科技大学, 陕西 西安 710055
  • 作者简介:张志政(1964- ) , 1985 年毕业于西北工业大学, 西安建筑科技大学副教授。电话: 13193365153, E-mail:zhangzhizheng@xauat.edu.cn

Abstract:

The running effect of the sedimentation of inlet water at periphery is decided by distributing water uniformity of distributing water trough, so it is required to distribute water uniformly in the distributing trough.The water surface curved line and the hydraulic calculation in the rectangular distributing trough uniformly are discussed and the calculation method of water surface curved line and orifice diameter on condition that interrupts or continues outlet water.

Key words: distributing water uniformly, interruption of outlet water, continnation of outlet water, water surface curved line, outlet water orifice diameter

摘要:

周边进水沉淀池的运行效果受配水槽配水均匀性的制约,因此要求在配水槽中均匀布水。对矩形均匀配水槽的水面曲线和水力计算进行了分析和探讨,给出了间断出水和连续出水两种情况下水面曲线及孔口直径的计算方法。

关键词: 均匀布水, 间断出水, 连续出水, 水面曲线, 出水孔径

CLC Number: