INDUSTRIAL WATER TREATMENT ›› 2009, Vol. 29 ›› Issue (8): 66-68. doi: 10.11894/1005-829x.2009.29(8).66

Previous Articles     Next Articles

Study on the treatment of azithromycin wastewater by Fenton reagent

Cheng Jian-feng1, Yang Wen-ling1, Liu Hong-mei1, Duan Hong-liang1, Huang Qun-xian2, Dong Ya-rong2   

  1. 1. College of Chemical and Pharmaceutical Engineering, Hebei University of Science and Technology, Shijiazhuang 050018, China;
    2. College of Environmental Science and Engineering, Hebei University of Science and Technology, Shijiazhuang 050018, China
  • Received:2009-04-08 Revised:2009-04-08 Online:2009-08-20 Published:2010-10-01

Fenton试剂处理阿奇霉素废水的研究

程建锋1, 杨文玲1, 刘红梅1, 段洪良1, 黄群贤2, 董亚荣2   

  1. 1. 河北科技大学化学与制药工程学院, 河北 石家庄 050018;
    2. 河北科技大学环境科学与工程学院, 河北 石家庄 050018
  • 作者简介:程建锋(1978- ),河北科技大学在读硕士研究生,助理工程师,主要研究方向为分离技术的研究与应用.电话13833473401,E-mail:jianfeng20080808@126.com.

Abstract:

The influential factors and suitable process of the treatment of azithromycin wastewater by Fenton reagent have been studied.By means of experiments, the best operating conditions of the treatment of azithromycin wastewater by Fenton reagent are determined as follows: the reaction temperature is 25 ℃, pH=3.0, FeSO4 dosage 10 mL/L, H2O2 dosage 30 mL/L, and the oxidation time should last for 2.0 h.The average COD removal rate is up to 51.09%.

Key words: azithromycin wastewater, Fenton reagent, chemical oxidation

摘要:

研究了用Fenton试剂处理阿奇霉素废水的影响因素及适宜工艺条件.试验表明,用Fenton试剂处理阿奇霉素废水的最佳实验条件:反应温度为25℃、pH为3.0、FeSO4投加量为10mL/L、H2O2投加量为30mL/L、氧化时间为2.0h.在此条件下,其对COD的平均去除率达51.09%.

关键词: 阿奇霉素废水, Fenton试剂, 化学氧化

CLC Number: