工业水处理 ›› 2009, Vol. 29 ›› Issue (7): 63-65. doi: 10.11894/1005-829x.2009.29.(7).63

• 分析与检测 • 上一篇    下一篇

铁屑处理废水工艺COD测定研究

王敏达, 邵青, 苏琴, 张新宁   

  1. 河北工业大学, 天津 300130
  • 收稿日期:2009-03-20 修回日期:2009-03-20 出版日期:2009-07-20 发布日期:2010-10-01
  • 作者简介:王敏达(1971- ),2003年毕业于南开大学,硕士,河北工业大学博士研究生.电话:13752081989,E-mail:wangminda@hebut.edu.cn

Study on the technological conditions and determination of COD in the treatment of wastewater from dye-stuff production by zero-valence iron internal electrolysis

Wang Minda, Shao Qing, Su Qin, Zhang Xinning   

  1. Hebei University of Technology, Tianjin 300130, China
  • Received:2009-03-20 Revised:2009-03-20 Online:2009-07-20 Published:2010-10-01

摘要:

目前,关于零价铁-内电解处理废水技术的研究相当广泛,因此系统地研究在这一工艺过程中如何避免和减小测定COD时由亚铁离子带来的测定偏差就显得至关重要.作者根据内电解处理染料废水实验条件的变化,探讨了内电解过程中的pH、水样放置时间对COD等指标测定的影响及机理,并且提出了采用内电解处理空白样的方法来避免或减小COD测定偏差.

关键词: 零价铁-内电解, COD测定, 染料废水

Abstract:

Considerable attention has been paid to the study of high standard on the wastewater treatment by zero-valence iron internal electrolysis. Therefore,systematic studies on how to avoid and reduce the deviation from the determination of COD are crucial.In this work,the effects of pH and lay-time of internal electrolysis on COD are investigated,based on the changes of the experimental conditions for the treatment of wastewater from dye-stuff production and their mechanisms are discussed.Moreover,the method for avoiding or reducing the deviations of the determination values by using internal electrolysis for treating blank samples is proposed.

Key words: zero-valence iron internal electrolysis, determination of COD, dye wastewater

中图分类号: