[1] Henze M. Activated Sludge Model No.2[R]. IAWQ:IAWQ Scien-tific and Technical Reports,1995.
[2] Henze M,Guijer W,Henze M,et al. Activaed sludge model No.1[R]. IAWPRC:Scientific and Technical Report. No.1,1987.
[3] Henze M,Guijer W,Mino T,et al. Activated sludge model No.2D,ASM2D[J]. Water Science and Technology,1999,39(1):165-182.
[4] Gujer W,Henze M,Mino T,et al. Activated sludge model No.3[J]. Water Science and Technology,1999,39(1):183-193.
[5] Sarkar U,Dasgupta D,Bhattacharya T,et al. Dynamic simulation of activated sludge based wastewater treatment processes:Case studies with Titagarh Sewage Treatment Plant,India[J]. Desalination,2010, 252(1/2/3):120-126.
[6] 蓝莓,李雯,吴宏举,等. 基于ASM1的城市污水厂优化诊断与改造[J]. 中国给水排水,2009,25(12):65-68.
[7] Benedetti L,Amerlink Y,Roles J,et al. Model-based optimization of controller settings at the WWTP of Oostende:trade-off between N removal and energy savings[C]∥Proceedings of the Water Environ-ment Federation:Water Environment Federation,2011:568-574.
[8] 舒海涛,罗健旭. 基于简化ASM1模型的污水处理厂曝气系统优化控制[J]. 计算机与应用化学,2012,29(1):67-70.
[9] 张亚雷,李咏梅. 活性污泥数学模型[M]. 上海:同济大学出版社,2003:50-60.
[10] 周振,吴志超,王志伟,等. 基于活性污泥模型的污水COD组分划分方案研究[J]. 环境科学,2010,31(6):1478-1482.
[11] Henze M. Characterization of wastewater for modeling of activated sludge process[J]. Water Science and Technology,1992,25(6): 1-15.
[12] Ginestet P,Maisonnior A,Sperandio M. Wastewater COD characterization:biodegradability of physico-chemical fractions[J]. Water Science and Technology,2002,45(6):89-97.
[13] Kappeler J,Gujer W. Estimation of kinetic parameters of heterotro-phic biomass under aerobic conditions and characterization of wastewater for activated sludge modeling[J]. Water Science and Technology,1992,25(6):125-139.
[14] Xu Shulan,Hultman B. Experience in wastewater characterization and model calibration for the activated sludge process[J]. Water Science and Technology,1996,33(12):89-98.
[15] Okutman D,Ovez S,Orhon D. Hydrolysis of settleable substrate in domestic sewage[J]. Biotechnology Letters,2001,23(23):1907-1914.
[16] 郝二成,周军,赵颖,等. 活性污泥2号模型中进水COD组分确定方法研究[J]. 给水排水,2008,34(4):32-36.
[17] Iacopozzi I,Innocenti V,Marsili-Libelli S,et al. A modified activated sludge model No.3(ASM3) with two-step nitrification-denitrifi-cation[J]. Environmental Modeling & Software,2007,22(6): 847-861.
[18] Printemps C,Baudin A,Dormoy T,et al. Optimisation of a large WWTP thanks to mathematical modeling[J]. Water Science and Technology,2004,50(7):113-122.
[19] 艾海男,张代均,何强,等. 基于ASM2的快速易生物降解COD组分表征方法构建[J]. 环境工程学报,2011,5(9):2005-2008.
[20] 李佟,李军,刘伟岩,等. 数学模型在污水处理厂优化控制过程中的应用[J]. 给水排水,2009,35(11):222-225.
[21] Swinarski M,Makinia J. Systems with an extention of the IWA activated sludge models[J]. Water Environment Research,2012,84(8):3266-3282.
[22] Mino T,SanPredro D C,Yamamoto S,et al. Application of the IAWQ activated sludge model to nutrient removal process[J]. Water Science and Technology,1997,35(8):111-118. |