工业水处理 ›› 2016, Vol. 36 ›› Issue (3): 97-99. doi: 10.11894/1005-829x.2016.36(3).097

• 工程实例 • 上一篇    下一篇

生物流化床-高级催化氧化工艺处理制药废水

杜家绪1, 买文宁1, 王敏1, 唐启2   

  1. 1. 郑州大学水利与环境学院, 河南 郑州 450001;
    2. 河南省有色金属地质矿产局第四地质大队, 河南 郑州 450008
  • 收稿日期:2016-01-12 出版日期:2016-03-20 发布日期:2016-03-29
  • 作者简介:杜家绪(1991-),硕士。电话:15824842783,E-mail:du_jiaxu@126.com。

Combined biological fluidized bed-advanced catalytic oxidation process used for pharmacy wastewater treatment

Du Jiaxu1, Mai Wenning1, Wang Min1, Tang Qi2   

  1. 1. School of Water Conservancy and Environment Engineering, Zhengzhou University, Zhengzhou 450001, China;
    2. No. 4 Geological Brigade of Henan Nonferrous Geological Mineral Resourse Burean, Zhengzhou 450008, China
  • Received:2016-01-12 Online:2016-03-20 Published:2016-03-29

摘要:

采用生物流化床-高级催化氧化工艺处理制药废水,介绍了制药废水处理工程的工艺流程、工艺设计、调试方法、处理效果和工程效益。运行结果表明,该系统处理效果好且运行稳定,出水水质满足《混装制剂类制药工业水污染物排放标准》(GB 21908-2008)表2标准。

关键词: 制药废水, 生物流化床, 高级催化氧化

Abstract:

The combined biological fluidized bed-advanced catalytic oxidation process has been designed for the treatment of pharmacy wastewater. The process flow, process design, debugging methods, treatment effect and engineering benefit of the pharmacy wastewater treatment project are introduced. The running results show that the treatment effect of the system is good, it runs steadily, and the effluent quality meets the requirements specified in Tab. 2 of the Discharge Standards of Water Pollutants for Pharmaceutical Industry Mixing/Compounding and Formulati on Category(GB 21908-2008).

Key words: pharmacy wastewater, biological fluidized bed, advanced catalytic oxidation

中图分类号: