工业水处理 ›› 1999, Vol. 19 ›› Issue (3): 18-19. doi: 10.11894/1005-829x.1999.19(3).18

• 试验研究 • 上一篇    下一篇

含油污水用破乳絮凝剂的应用试验

邵青1, 王伟1, 林蓓1, 陈路2, 韦江2, 张伟厚3   

  1. 1. 化工部天津化工研究设计院, 天津 300131;
    2. 新疆石油管理局勘察设计院;
    3. 新疆克拉玛依采油一厂
  • 收稿日期:1999-01-05 出版日期:1999-05-20 发布日期:2014-08-22
  • 作者简介:邵青,1955年生,1983年毕业于天津大学化 工系,现就职于天津化工研究设计院,高级工程师。

THE TEST OF EMULSION BREAKING FLOCCULANT FOR OIL-BEARING SEWAGE

Shao Qing1   

  1. Tianjin Research and Design Institute of Chemical Industry, Tianjin 300131
  • Received:1999-01-05 Online:1999-05-20 Published:2014-08-22

摘要:

介绍TX-107系列有机高分子破乳絮凝剂,对新疆克拉玛依采油一厂稀油污水的处理实验,使用原来的絮凝剂处理后出水含油量为117.24mg/L,使用该药剂处理后出水平均含油量低于26.7mg/L.

关键词: 破乳絮凝剂, 油田回注水, 含油污水

Abstract:

This is an intruduction to TX—107 series organic high molecular weight emulsion breaking flocculant industrial test for oil-bearing sewage in First Oil Exploitation Factory Kelamayi, Xinjiang. The average oil content in water-out is below 26.7 mg/L, after treated by TX—107 agent, Whereas the original average oil content in water-out is 117.24 mg/L with the application of others.

Key words: emulsion breaking flocculation, reuse of the oil-bearing sewage for injection water, treatment of oil-bearing sewage