工业水处理 ›› 2011, Vol. 31 ›› Issue (4): 79-81. doi: 10.11894/1005-829x.2011.31.(4).79

• 经验交流 • 上一篇    下一篇

脱墨浆造纸废水处理污泥上浮问题解决实例

张安龙, 潘洪艳, 樊砥钢   

  1. 陕西科技大学, 陕西西安710021
  • 收稿日期:2011-01-14 修回日期:2011-01-14 出版日期:2011-04-20 发布日期:2011-04-13
  • 作者简介:张安龙(1961- ),1985 年毕业于西北轻工业学院,教授。电话:13629245307,E-mail:wphongyan@163.com

Solution to the sludge floating problems for the treatment of deinked stock paper-making wastewater

Zhang Anlong, Pan Hongyan, Fan Digang   

  1. Shaanxi University of Science & Technology, Xi’an 710021, China
  • Received:2011-01-14 Revised:2011-01-14 Online:2011-04-20 Published:2011-04-13

摘要:

针对脱墨浆造纸废水处理沉淀池发生污泥上浮现象,从温度、pH、致毒性底物、食微比、溶解氧等因素进行了分析,得出曝气量过大污泥会被打得又轻又碎,引起污泥上浮。提出了减小曝气量、增大营养盐投加比等有效的解决措施。

关键词: 改良式氧化沟, 污泥上浮, 溶解氧

Abstract:

Aiming at the sludge floating phenomenon taken place in the sedimentation tank while the deinked stock wastewater is being treated,the factors, such as temperature,pH,toxic substrate,F/M,dissolved oxygen have been analyzed. It is concluded that the sludge will be lightened and broken by the excessive aeration,causing the sludge floating. Reducing the aeration rate,increasing nutrient salt dosage ratio,and other effective measures are proposed.

Key words: improved oxidation ditch, sludge floating, dissolved oxygen

中图分类号: