INDUSTRIAL WATER TREATMENT ›› 2012, Vol. 32 ›› Issue (6): 20-22. doi: 10.11894/1005-829x.2012.32(6).20

Previous Articles     Next Articles

Study on the preparation of Fe-doped PbO2 electrode and its degradation capability of phenols wastewater

Wang Yankun1, Wu Chongzhen1, Zhang Jianmin2   

  1. 1. Department of Chemistry, Henan Institute of Education, Zhengzhou 450046, China;
    2. Department of Chemistry, Zhengzhou University, Zhengzhou 450001, China
  • Received:2012-03-19 Online:2012-06-20 Published:2012-06-20

掺杂Fe-PbO2电极的制备及其对酚类废水降解性能研究

王艳坤1, 吴崇珍1, 张建民2   

  1. 1. 河南教育学院化学系, 河南郑州 450046;
    2. 郑州大学化学系, 河南郑州 450001
  • 作者简介:王艳坤(1973-),1997年毕业于成都电子科技大学,硕士,副教授.电话:0371-69303775,E-mail:yankunwang@126.com.
  • 基金资助:

    国家自然科学基金资助项目(20873126);河南省科技攻关重点项目(122102210062);河南省教育厅自然科学基础研究计划项目(12B150009)

Abstract:

The anodic galvanostatic electrodeposition technique has been used for preparing PbO2 and Fe-doped PbO2 electrodes on stainless steel substrate.The crystal phase structure,surface morphology and element composition of the electrodes are characterized and analyzed by X-ray diffraction,scanning electron microscopy and energy dispersive spectroscopy.The degradation rate of phenols simulated wastewater by electro-catalytic oxidation method with the PbO2 electrode and Fe-doped PbO2 electrode on stainless steel substrate is studied.The results show that the surface morphology and diffraction intensity of Fe-doped PbO2 electrode have changes in different degrees.The added Fe3+ ions may enter into PbO2 surface layer,and the Fe-doped PbO2 electrode has better electro-catalytic oxidation capacity than common PbO2.

Key words: electrodeposition, Fe-doped PbO2 electrode, electro-catalysis

摘要:

采用阳极恒电流电沉积技术制备不锈钢基PbO2电极及掺杂Fe-PbO2电极。采用XRD、SEM、EDS等方法对电极的物相结构、表面形貌、元素组成进行了表征和分析,对PbO2电极及掺杂Fe-PbO2电极电催化氧化酚类模拟废水的降解率进行研究,结果表明:掺杂Fe-PbO2电极表面形貌及衍射强度发生不同程度的改变,添加的Fe3+可能进入了表层内部,掺杂Fe-PbO2电极较普通的PbO2电极对酚类废水具有更好的电催化氧化降解性能。

关键词: 电沉积, 掺杂Fe-PbO2电极, 电催化

CLC Number: