Abstract:
The four-section combined process,chemical precipitation-electrocoagulation-DAF-membrane separation, has been applied to the treatment of arsenic-containing wastewater. After the raw water,whose arsenic content is 180-230 mg/L,has been treated by this process,the arsenic content of effluent is reduced to less than 0.03 mg/L,and the removing rate is more than 99.9%. The running result of the project shows that the system runs stably,and has high treatment efficiency. The produced clear water can be used as circulating cooling water,lowering the production cost greatly.
Key words:
arsenic-containing wastewater,
reuse,
semiconductor materials
摘要:
采用沉淀法-电絮凝法-气浮法-膜分离法四段组合工艺对含砷废水进行处理,原水含砷180~230 mg/L,经该工艺处理后出水含砷<0.03 mg/L,去除率>99.9%。工程运行实践证明:该系统运行稳定、处理效果高,产出的清水用作生产用循环冷却水,大大降低了生产成本。
关键词:
含砷废水,
回用,
半导体材料
CLC Number:
Liu Tinglong, Xiao Xiangjiang, Shan Jiyun, Li Subin, Hui Feng, Li Xuefeng, Tian Dong, Lu Jijun. Treatment and recycle project on arsenic-containing wastewater from semiconductor production[J]. INDUSTRIAL WATER TREATMENT, 2017, 37(4): 96-98.
柳廷龙, 肖祥江, 单吉云, 李苏滨, 惠峰, 李雪峰, 田东, 卢纪军. 半导体生产含砷废水处理回用工程[J]. 工业水处理, 2017, 37(4): 96-98.