INDUSTRIAL WATER TREATMENT ›› 2019, Vol. 39 ›› Issue (2): 99-102. doi: 10.11894/1005-829x.2019.39(2).099

Previous Articles     Next Articles

Research on the treatment of traditional Chinese medicine extracting wastewater with micro-electrolysis-UASB-MBBR process and engineering application

Wang Zonghua1,2, Zhao Dongsheng1   

  1. 1. Academy of Civil Engineering and Architecture, Nanyang Normal University, Nanyang 473000, China;
    2. Collaborative Innovation Center of Water Security for Water Source Region of Mid-Route Project of South-to-North Water Diversion of Henan Province, Nanyang 473000, China
  • Received:2018-12-26 Online:2019-02-20 Published:2019-03-15

微电解-UASB-MBBR处理中药提取废水研究与应用

王宗华1,2, 赵东升1   

  1. 1. 南阳师范学院土木建筑工程学院, 河南南阳 473000;
    2. 南水北调中线水源区水安全河南省协同创新中心, 河南南阳 473000
  • 作者简介:王宗华(1976-),硕士,副教授。电话:13733114599,E-mail:wangzonghua3511@163.com。
  • 基金资助:
    河南省科技攻关项目(162102310480)

Abstract: The combined process,micro-electrolysis-UASB-MBBR,has been applied to the treatment of traditional Chinese medicine extracting wastewater,and the parameters of engineering design investigated. The results show that when the micro-electrolysis hydraulic retention time is 4 h,COD volume load of UASB 3.0 kg/(m3·d),and MBBR hydraulic retention time 20 h,the water quality of the coagulated and decolored effluent meets the requirements for the water pollutant discharge limiting value in China newly built enterprises,specified in the Discharge Standard of Water Pollutants from Pharmaceutical Industry of Chinese Medicine Category(GB 21906-2008). The running effect of this technology is stable,and its investment costs are low.

Key words: micro-electrolysis, traditional Chinese medicine extracting wastewater, UASB, MBBR, decolorization

摘要: 采用微电解-UASB-MBBR工艺对中药提取废水进行处理,对工程设计参数进行了探索。结果表明:当微电解水力停留时间为4 h,UASB COD容积负荷为3.0 kg/(m3·d),MBBR水力停留时间为20 h时,经混凝脱色后的出水水质达到《中药类制药工业水污染物排放标准》(GB 21906-2008)中新建企业水污染物排放限值要求,且工艺运行效果稳定,费用较低。

关键词: 微电解, 中药提取废水, 上流厌氧污泥床, 移动床生物膜反应器, 脱色

CLC Number: