工业水处理 ›› 2001, Vol. 21 ›› Issue (7): 38-41. doi: 10.11894/1005-829x.2001.21(7).38

• 经验交流 • 上一篇    下一篇

双室床最优工况调试方法及运行注意事项

田文华   

  1. 西北电力试验研究院, 陕西西安 710054
  • 收稿日期:2001-01-20 出版日期:2001-07-20 发布日期:2010-10-01
  • 作者简介:田文华(1968- ),西北电力试验研究院环保室主任,工程师,并在职攻读清华大学环境工程专业博士研究生,联系电话:029-7850297或13002960255.

Commissioning method of optimal condition of double chamber bed and its key operational process

TIAN Wenhua   

  1. Northwest China Electric Power Test and Research Institute, Xi’an 710054, China
  • Received:2001-01-20 Online:2001-07-20 Published:2010-10-01

摘要:

双室床调试中应注意控制好树脂和 EPS惰性白球的高度,最佳再生剂量可通过测定再生废液中残余酸 (碱 )度确定。运行中应按设计要求选用水源 ;阴床再生应先预热,再用 40℃热碱液再生 ;定期对树脂擦洗和活化,防止树脂污染,对已污染的树脂及早复苏。

关键词: 水处理设备, 离子交换器, 双室固定床

Abstract:

In the commissioning of fixed double chamber bed,the height of resin and EPS inert plastic balls should be adjusted precisely,and the optimal consumption of regenerant can be determined by measuring the concentratio n of acid ( alkali ) in waste liquid. In operational period, water resource should be selected according to the design,and anion bed should be preheated and then regenerated with hot alkali liquid of 40 ℃ .In addition,the resin should be scrubbed periodically,to prevent the resin from pollution and to regenerate the polluted resin earlier.

Key words: water treatment equipment, ion-ex change equipment, fixed double chamberbed

中图分类号: