工业水处理 ›› 2006, Vol. 26 ›› Issue (9): 83-84,89. doi: 10.11894/1005-829x.2006.26(9).83

• 经验交流 • 上一篇    下一篇

气浮-A/O工艺处理含油污水

杨大明, 徐伟, 武雄飞   

  1. 沈阳石蜡化工有限公司, 辽宁沈阳 110141
  • 收稿日期:2006-02-21 出版日期:2006-09-20 发布日期:2010-10-01
  • 作者简介:杨大明(1977- ),1998 年毕业于沈阳广播电视大学精细化工专业,工程师。电话:024-25390235,13889212420,E-mail:ydm770111@163.com。

Air floatation-A/O process for the treatment of oil-bearing effluent

Yang Daming, Xu Wei, Wu Xiongfei   

  1. Shenyang Paraffin Refinery Plant, Shenyang 110141, China
  • Received:2006-02-21 Online:2006-09-20 Published:2010-10-01

摘要:

介绍了气浮-A/O工艺处理含油污水的应用情况。该处理工艺经过6a的运行,在进水的S2-、CODCr、石油类的质量浓度分别为14.82mg/L、1244.5mg/L、184.89mg/L条件下,外排污水S2-、CODCr、石油类的质量浓度分别为0.28mg/L、80.16mg/L、4.84mg/L,达到了行业排放标准。同时该工艺具有运行稳定、处理效果好的特点。

关键词: 气浮, 厌氧/好氧工艺, 含油污水

Abstract:

The application of air floatation-A/O technology to the treatment of oil-bearing effluent has been described in detail.After the six-year experience of running, it show S2-, CODCr, and oil of the effluent are 0.28 mg/L, 80.16mg/L and 4.84mg/L respectively, which reaches the discharged standard, on condition such as S2- 14.82mg/L, CODCr 1 244.5mg/L and oil 184.89mg/L. The results of treatment technology show that it has two advantages, high running stability and excellent treatment effect.

Key words: air floatation, anaerobic/aerobic process, oil-bearingeffluent

中图分类号: