工业水处理 ›› 2011, Vol. 31 ›› Issue (9): 72-75. doi: 10.11894/1005-829x.2011.31(9).72

• 分析与监测 • 上一篇    下一篇

工业废水色度的测定方法研究

钱飞跃, 孙贤波, 刘勇弟, 李暮, 李欣珏, 李新   

  1. 华东理工大学资源与环境工程学院, 上海 200237
  • 收稿日期:2011-07-21 修回日期:2011-07-21 出版日期:2011-09-20 发布日期:2011-09-29
  • 通讯作者: 刘勇弟,E-mail:ydliu@ecust.edu.cn。 E-mail:ydliu@ecust.edu.cn
  • 作者简介:钱飞跃(1986- ),2009 级华东理工大学在读博士生。E-mail:feiyuechandler@163.com。
  • 基金资助:

    863 国家高技术研究发展计划重点项目(2009AA063904)

Research on the chroma measurement of industrial wastewater

Qian Feiyue, Sun Xianbo, Liu Yongdi, Li Mu, Li Xinjue, Li Xin   

  1. School of Resources and Environmental Engineering, East China University of Science and Technology, Shanghai 200237, China
  • Received:2011-07-21 Revised:2011-07-21 Online:2011-09-20 Published:2011-09-29

摘要:

考察了浊度去除方法、pH及颜色对工业废水色度测定的影响,分析了稀释倍数与ADMI值的关系。研究结果表明0.45μm滤膜过滤更适于去除色度测定前的浊度。当pH为6.0~9.0时,pH对色度的影响较小。此外,稀释倍数与ADMI值的相关性与颜色种类无关,稀释倍数=0.19×ADMI31(R2>0.991)。

关键词: 色度, 工业废水, 稀释倍数

Abstract:

The effect of turbidity removal methods,pH and hues on the chroma measurement of industrial wastewater has been investigated,and the relationship between dilution ratio (DR) and ADMI values has been analyzed. The results show that the 0.45 μm filter membrane is more suitable for turbidity removal before chroma measurement. When pH is in the range from 6.0-9.0,the effect of pH difference on the chroma could be negligible.In addition,the correlation between the DR and ADMI values bears no relation to hues,DR =0.19 ×ADMI31(R2>0.991).

Key words: chroma, industrial wastewater, dilution ratio

中图分类号: