工业水处理 ›› 2011, Vol. 31 ›› Issue (5): 79-81. doi: 10.11894/1005-829x.2011.31.(05).79

• 经验交流 • 上一篇    下一篇

改良型A2/O工艺污水处理厂的设计与运行

班福忱, 张晓宁, 李亚峰   

  1. 沈阳建筑大学市政与环境工程学院, 辽宁沈阳 110168
  • 收稿日期:2011-03-17 出版日期:2011-05-20 发布日期:2011-05-19
  • 作者简介:班福忱(1976- ),2010年毕业于东北大学,博士.电话:024-24690720
  • 基金资助:

    住房和城乡建设部科学研究项目(2010-K7-2)

Design and operation of a sewage treatment plant by modified A2/O process

Ban Fuchen, Zhang Xiaoning, Li Yafeng   

  1. School of Municipal and Environmental Engineering, Shenyang Architecture University, Shenyang 110168, China
  • Received:2011-03-17 Online:2011-05-20 Published:2011-05-19

摘要:

某污水处理厂设计规模为5×104 m3/d,其污水处理工艺流程采用改良型A2/O 工艺,污泥处理采用直接浓缩脱水工艺。对该工艺流程的主要构筑物、设计参数及运行情况进行了介绍,结果表明,处理后的水质达到《城镇污水处理厂污染物排放标准》(GB 18918—2002)中的一级标准。

关键词: 污水处理, 改良型A2/O, 污泥

Abstract:

The designed scale of the sewage treatment plant discussed is 50000 m3/d.A modified A2/O process hasbeen used for treating the sewage water,and the sewage sludge is thickened and dewatered directly.The main structures,designed parameters and operation are introduced.The quality of the treated water meets the requirements of the first class of Discharge Standard of Pollutants for Municipal Wastewater Treatment Plant(GB 18918—2002).

Key words: sewage treatment, modified A2/O, sludge