工业水处理 ›› 2012, Vol. 32 ›› Issue (6): 16-19,85. doi: 10.11894/1005-829x.2012.32(6).16

• 专论与综述 • 上一篇    下一篇

工业废水焚烧处理工艺综述

肖双全1, 马吉亮2, 李晓军1, 陈晓平2   

  1. 1. 大庆油田有限责任公司, 黑龙江大庆 163453;
    2. 东南大学热能工程研究所, 江苏南京 210096
  • 收稿日期:2012-04-12 出版日期:2012-06-20 发布日期:2012-06-20
  • 作者简介:肖双全(1975-),2011年毕业于吉林大学,硕士,工程师.电话:13159810182,E-mail:xiaoshuangquan@petrochina.com.cn
  • 基金资助:

    国家科技重大专项(2008ZX05055)

Review of the incineration process for the treatment of industrial wastewater

Xiao Shuangquan1, Ma Jiliang2, Li Xiaojun1, Chen Xiaoping2   

  1. 1. Daqing Oilfield Co, Ltd, Daqing 163453, China;
    2. Thermal Energy Engineering Research Institute, Southeast University, Nanjing 210096, China
  • Received:2012-04-12 Online:2012-06-20 Published:2012-06-20

摘要:

笔者讨论了焚烧法处理工业废水的机理以及废水焚烧效果的影响因素。介绍了国内外主要的废水焚烧炉型,并分析了各种焚烧炉的特点。介绍了废水焚烧工艺在国内外的应用情况。并指出优化焚烧炉的操作参数,从而达到较高的焚烧效率又保证较低的污染物排放浓度是研究废水焚烧工艺的发展方向。

关键词: 工业废水, 焚烧炉, 焚烧处理工艺

Abstract:

The mechanism of incineration process for the treatment of industrial wastewater,as well as the factors influencing the incineration efficiency,is discussed.Main kinds of incinerators for treating wastewater in China and abroad are introduced,and the characters of incinerators are analyzed.The operation parameters of optimal incinerators are put forward.It is pointed out that achieving higher incinerating efficiency and lower pollutant emission concentration is the development direction of the research on wastewater incineration process.

Key words: industrial wastewater, incinerator, incineration treatment process

中图分类号: