摘要： 采用以二氧化钛为粒子电极，铝板为阳极，钛板为阴极形成的三维电化学体系对经氧化絮凝预处理的页岩气返排液进行深度处理。通过单因素实验得到最佳频率、占空比及二氧化钛投加量。依据响应面分析结果预测的最佳工艺条件：pH=7.33，电流为58.01 mA，处理时间为39.44 min。在最佳工艺条件下，模型预测COD去除率为92.3%，与实际值误差为1.4%。采用氧化絮凝-三维电极法处理页岩气返排液，出水可达到排放标准要求。

关键词: 页岩气返排液, 氧化絮凝, 三维电极, 响应曲面法

Abstract: The shale gas fracturing liquid which experienced oxidation flocculation pre-treatment has been treated in depth by a three- dimension electrochemical system formed with titanium dioxide as particle electrode,aluminum plate as anode and titanium plate as cathode. By means of single-factor experiments,the optimum frequency,duty ratio and titanium dioxide dosage are obtained. The best process conditions predicted according to the response surface analysis results are as follows:pH=7.33,I=58.01 mA,and treatment time 39.44 min. Under the optimum conditions,the predicted COD removing rate of the model is 92.3%. The error compared with the actual value is 1.4%. By oxidation flocculation-three- dimension electrode method,the effluent can meet the requirements for the discharge standard.

Key words: shale gas fracturing liquid, oxidation flocculation, three-dimensional electrode, response surface method

中图分类号: 

• X703.1