Abstract:
The enhanced coagulation experiments have been carried on by combining bleaching agent dicyandiamide and PAC for treating the secondary effluent water in a printing & dyeing plant. The optimum composited ratio and coagulation conditions are determined. The results show that the best composited ratio of the coagulant is 0.12mL/L of bleaching agent dicyandiamide and 87.5 mg/L of PAC. At this time, the decoloration rate is up to 74%,CODCr removing rate 57%,and UV254 removing rate 36%. The experimental results show that the composited coagulant is highly effective.
Key words:
bleaching agent dicyandiamide,
enhanced coagulation,
dyeing wastewater
摘要:
将双氰胺脱色剂与聚合氯化铝进行复配,对某印染厂的二级处理出水进行强化混凝试验,确定了最佳的混凝剂复配比及混凝条件。研究结果表明:混凝剂的最佳复配比为双氰胺脱色剂0.12 mL/L、PAC 87.5 mg/L,此时脱色率达74%,CODCr去除率达57%,UV254去除率达36%,该复合混凝剂的处理效果良好。
关键词:
双氰胺脱色剂,
强化混凝,
印染废水
CLC Number:
Zhou Xia, Yang Xiaojun, Xu Bin,Hou Jian, Qin Xinlin, Zeng Qingfu. Study on enhanced coagulation treatment of printing & dyeing wastewater by using bleaching agent dicyandiamide[J]. INDUSTRIAL WATER TREATMENT, 2012, 32(1): 25-27.
周霞, 杨小俊, 徐斌, 侯健, 秦新林, 曾庆福. 双氰胺脱色剂强化混凝处理印染废水[J]. 工业水处理, 2012, 32(1): 25-27.