INDUSTRIAL WATER TREATMENT ›› 2017, Vol. 37 ›› Issue (10): 72-77. doi: 10.11894/1005-829x.2017.37(10).072

Previous Articles     Next Articles

Optimization of response surface method for the SCWO treatment of tire cracking desulphurizing waste liquid

Shi Xiaokang, Wang Li   

  1. College of Resources and Environmental Engineering, Wuhan University of Science and Technology, Wuhan 430081, China
  • Received:2017-06-26 Online:2017-10-20 Published:2017-10-31
  • Supported by:
     

SCWO处理轮胎裂解脱硫废液的响应面法优化

石晓康, 王黎   

  1. 武汉科技大学资源与环境工程学院, 湖北武汉 430081
  • 作者简介:石晓康(1990-),硕士.电话:18271631032,E-mail:303217984@qq.com.
  • 基金资助:
     

Abstract: Using supercritical water oxidation(SCWO)method for treating the desulphurizing waste liquid produced in the process of waste tire pyrogenation,the main influential factors in the treatment process have been optimized by response surface method(RSM),and the COD removing rate secondary regression model has been established through central composite design(CCD). The measured value is compared with the predicated value based on model calculation. The results show that the analysis on experimental results by substituting the model for real testing point has higher reliability.

Key words: supercritical water oxidation, tire cracking desulphurizing wastewater, response surface method

摘要: 采用超临界水氧化(SCWO)法处理废旧轮胎热解过程中产生的脱硫废液,利用响应面法对处理过程中的主要影响因素进行了优化,并通过中心复合设计(CCD)建立了COD去除率的二次回归模型。将实测值与根据模型计算的预测值进行对比,结果表明,以模型代替真实实验点对实验结果进行分析具有较高的可靠性。

关键词: 超临界水氧化, 轮胎裂解脱硫废液, 响应面法

CLC Number: