INDUSTRIAL WATER TREATMENT ›› 2017, Vol. 37 ›› Issue (8): 105-108. doi: 10.11894/1005-829x.2017.37(8).105

Previous Articles     Next Articles

Process design and verification of the triple-concentrated,low temperature and multiple-effect desalination system

Liu Xuezhong   

  1. Beijing Low Temperature Multi Effect Thermal Desalination Engineering Technology Research Center, China Electronics Engineering Design Institute, Beijing 100142, China
  • Received:2017-06-19 Online:2017-08-20 Published:2017-09-04

三倍浓缩低温多效海水淡化装置的工艺设计及验证

刘学忠   

  1. 中国电子工程设计院, 北京市低温多效热法海水淡化工程技术研究中心, 北京 100142
  • 作者简介:刘学忠(1970-),高工。电话:18601265346,E-mail:liuxuezhong@ceedi.cn。
  • 基金资助:
    国家科技支撑计划(2015BAB08B00);国家开发投资公司科研开发项目(00002)

Abstract: The process flow,parameters and operating results of triple-concentrated,low temperature,multiple ef-fect desalination(LTMED)technology is introduced. By fully taking the scaling risk of highly concentrated multi-plying ratio into consideration,the seawater downstream flow has been used,the parameters such as the number of effect of evaporators,heat transfer temperature difference between effects,spray density of seawater,etc. opti-mized,and a set of double-concentrated 1 000 t/d LTMED device modified technically,the triple-concentrated process tested and verified,and the anti-scaling and corrosion-resistance performances of the evaporator tested. The running results show that all the performance indexes,including concentration ratio and water producing ratio achieve the expected objective.

Key words: low temperature multi-effect evaporation, seawater desalination, seawater concentration

摘要: 对三倍浓缩低温多效海水淡化技术的工艺流程、参数及运行效果进行了介绍。充分考虑高浓缩倍率的结垢风险,设计采用海水顺流流程,对蒸发器效数、效间传热温差、海水喷淋密度等进行了优化,并将一套二倍浓缩1 000 t/d低温多效海水淡化装置进行技术改造,对三倍浓缩工艺进行了试验验证,测试了蒸发器的抗结垢性能和耐腐蚀性能。运行结果显示,浓缩比、造水比等各项性能指标达到预期目标。

关键词: 低温多效蒸发, 海水淡化, 海水浓缩

CLC Number: