INDUSTRIAL WATER TREATMENT ›› 2018, Vol. 38 ›› Issue (10): 33-36. doi: 10.11894/1005-829x.2018.38(10).033

Previous Articles     Next Articles

Research on magnetic carboxymethyl cellulose nanoparticles for the adsorption of copper ions

Wang Licong1,2, Cao Yuhua1   

  1. 1. School of Chemical and Material Engineering, Jiangnan University, Wuxi 214122, China;
    2. Department of Chemical and Textile Engineering, Jiangyin Polytechnic College, Jiangyin 214405, China
  • Received:2018-06-27 Online:2018-10-20 Published:2018-10-29

磁性羧甲基纤维素纳米粒子吸附铜离子研究

王丽聪1,2, 曹玉华1   

  1. 1. 江南大学化学与材料工程学院, 江苏无锡 214122;
    2. 江阴职业技术学院化纺系, 江苏江阴 214405
  • 通讯作者: 曹玉华,E-mail:yuhuacao64@gmail.com。
  • 作者简介:王丽聪(1979-),博士研究生。电话:0510-86022663,E-mail:licong_wang@163.com。
  • 基金资助:
    食品胶体与生物技术教育部重点实验室项目(Grant No.JDSJ2013-03)资助

Abstract: Magnetic carboxymethyl cellulose nano-particles(CMC@Fe3O4) have been prepared by co-precipitation method,the prepared CMC@Fe3O4 characterized by means of transmission electron microscopy,Fourier transform infrared spectroscopy and vibrating sample magnetometer,the optimal dosage of CMC discussed,and their adsorption capability for Cu2+ investigated. The results show that CMC can successfully be coated on the outer layer of Fe3O4. The maximum adsorption capacity of CMC@Fe3O4 for Cu2+ is 41.62 mg/g. The CMC@Fe3O4 adsorption for Cu2+ complies with the Langmuir equation quite well,and the adsorption process can be described by pseudo-second-order kinetic equation.

Key words: carboxymethyl cellulose, magnetic nano-particles, adsorption, copper ions

摘要: 采用共沉淀法制备了磁性羧甲基纤维素纳米粒子(CMC@Fe3O4),利用TEM、FTIR和VSM等手段对制备的CMC@Fe3O4进行了表征,探讨了CMC的最佳用量,并进行了吸附Cu2+性能研究。结果表明,CMC成功包覆在Fe3O4外层,制备的CMC@Fe3O4对Cu2+的最大吸附量为41.62 mg/g。CMC@Fe3O4对Cu2+的吸附较好地满足Langmuir方程,吸附过程可以用准二级动力学方程描述。

关键词: 羧甲基纤维素钠, 磁性纳米粒子, 吸附, 铜离子

CLC Number: