INDUSTRIAL WATER TREATMENT ›› 2016, Vol. 36 ›› Issue (3): 93-96. doi: 10.11894/1005-829x.2016.36(3).093

Previous Articles     Next Articles

Case study on the combined process,UASB+CASS for the treatment of beer wastewater

Li Xiaoting   

  1. Life Science & Resources Environment Institute, Jiangxi Yichun University, Yichun 336000, China
  • Received:2016-01-20 Online:2016-03-20 Published:2016-03-29

UASB+CASS组合工艺处理啤酒废水工程实例

李晓婷   

  1. 宜春学院生命科学与资源环境学院, 江西 宜春 336000
  • 作者简介:李晓婷(1982-),讲师。电话:13979599984,E-mail:xiaoxiao68022@sina.com。

Abstract:

Based on the comprehensive analysis of the characteristics of the wastewater from beer production, combining with the original technology in water treatment stations and a number of practical experiences of similar waste-water plants, it is proposed that the combined process, UASB+CASS, is to be used for the treatment of beer waste-water.The running results show that all the effluent COD, BOD5, SS, and NH3-N can meet the requirements specified in Level l of the Discharge Standard of Pollutants for Beer Industry(GB 19821-2005).The effluent, animal and plant oils, and anionic surfactant can meet the requirements specified in Level l of Integrated Wastewater Discharge Standard(GB 8978-1996).Using the combined process for the treatment of wastewater from beer production is technically and economically feasible.

Key words: beer wastewater, upflow anaerobic sludge bed, cyclic activated sludge method

摘要:

通过对啤酒生产制作废水特点的综合分析,结合原有污水处理站工艺及多家同类污水站的实践经验,提出采用UASB+CASS组合工艺处理啤酒废水。运行结果表明:出水COD、BOD5、SS、NH3-N均满足《啤酒工业污染物排放标准》(GB 19821-2005)一级标准,出水动植物油、阴离子表面活性剂满足《污水综合排放标准》(GB 8978-1996)一级标准,采用该组合工艺处理啤酒生产废水,在技术和经济上可行。

关键词: 啤酒废水, 升流式厌氧污泥床, 循环式活性污泥法

CLC Number: