Industrial Water Treatment ›› 2019, Vol. 39 ›› Issue (8): 15-18. doi: 10.11894/iwt.2018-1028

• Summaries and Theses on Special Topics • Previous Articles     Next Articles

Optimization measures for denitrification and phosphorus removal based on inverted A2/O process

Yafeng Li(),Sijing Yang*(),Yaofu Yu   

  1. School of Municipal and Environmental Engineering, Shenyang Jianzhu University, Shenyang 110168, China
  • Received:2019-05-20 Online:2019-08-20 Published:2019-08-21
  • Contact: Sijing Yang E-mail:yafengli88@sina.com;354872483@qq.com

基于倒置A2/O工艺脱氮除磷存在问题的优化措施

李亚峰(),杨嗣靖*(),于燿滏   

  1. 沈阳建筑大学市政与环境工程学院, 辽宁沈阳 110168
  • 通讯作者: 杨嗣靖 E-mail:yafengli88@sina.com;354872483@qq.com
  • 作者简介:李亚峰(1960-),教授,博士。E-mail:yafengli88@sina.com

Abstract:

With the improvement of national sewage discharge standards, the mass concentrations of COD, NH4+-N, TN and TP all could not meet the emission standards when using traditional inverted anoxic-anaerobic-oxic(A2/O) process to treat wastewater. The problems of carbon source competition, insufficient carbon source of influent and contradiction of SRT are optimized and improved. The purpose of improving the performance of nitrogen and phosphorus removal is achieved by adopting the method of step feed mode, external carbon source and running in conjunction with MBR. At the same time, in order to be able to respond the occurrence of various water quality emergencies in a timely manner, multi-mode operation theory should be adopted.

Key words: nitrogen and phosphorus removal, external carbon source, step feed mode, MBR, multi-mode operation

摘要:

随着污水排放标准的提升,采用常规倒置A2/O工艺处理废水时,COD、NH4+-N、TN、TP的质量浓度无法全部达到排放标准要求。对该工艺存在的碳源竞争、进水碳源不足、SRT矛盾等不足进行优化改进,通过分段进水、投加外加碳源、MBR工艺联合运行的方式达到提高脱氮除磷性能的目的。同时,为及时处理各类水质突发状况,宜采取多模式运行理论。

关键词: 脱氮除磷, 外加碳源, 分段进水, MBR, 多模式运行

CLC Number: