工业水处理 ›› 2025, Vol. 45 ›› Issue (11): 140-150. doi: 10.19965/j.cnki.iwt.2024-0920

• 试验研究 • 上一篇    

湿式催化过氧化氢氧化处理环氧氯丙烷生产污水研究

李海帆1,2,3(), 冯华良2,3, 张召基2,3()   

  1. 1. 福州大学环境与安全工程学院,福建 福州 350108
    2. 中国科学院城市环境研究所,福建 厦门 361021
    3. 宁波(北仑)中科海西产业技术创新中心,浙江 宁波 315830
  • 收稿日期:2025-04-01 出版日期:2025-11-20 发布日期:2025-11-20
  • 通讯作者: 张召基
  • 作者简介:

    李海帆(1998— ),硕士,E-mail:

  • 基金资助:
    宁波市青年科技创新领军人才项目(2023QL026); “科创甬江2035”第一批关键技术突破计划项目(2024Z251)

Study on treatment of epichlorohydrin production wastewater by catalytic wet hydrogen peroxide oxidation

Haifan LI1,2,3(), Hualiang FENG2,3, Zhaoji ZHANG2,3()   

  1. 1. College of Environment and Safety Engineering, Fuzhou University, Fuzhou 350108, China
    2. Institute of Urban Environment, Chinese Academy of Sciences, Xiamen 361021, China
    3. CAS Haixi Industrial Technology Innovation Center in Beilun, Ningbo 315830, China
  • Received:2025-04-01 Online:2025-11-20 Published:2025-11-20
  • Contact: Zhaoji ZHANG

摘要:

环氧氯丙烷生产污水具有高有机物、高盐度和可生化性差等特点,处理难度较大,因此开发高效的处理工艺是该工业污水治理的迫切需求。高级氧化法在处理难降解有机物领域具有很大的优势,优化了过硫酸盐高级氧化工艺(SAOPs)、湿式催化过氧化氢氧化工艺(CWPO)处理环氧氯丙烷生产污水的工艺条件,对比了两种高级氧化工艺处理环氧氯丙烷废水的效果及出水水质,并利用全二维气相色谱-质谱(GC×GC-MS)从分子层面对CWPO处理过程中的有机污染物转化特性进行了探究。结果表明CWPO工艺处理环氧氯丙烷生产污水的最优条件为pH=9.0、反应温度70 ℃、Mn-Ce/Al2O3投加量20 g/L、m(H2O2)∶m(COD)=4∶1、H2O2分批次投加,此条件下反应80 min,TOC去除率达到86.00%,出水残余有机卤素质量浓度为52.3 mg/L、急性毒性值为60.33%,处理效果优于SAOPs。GC×GC-MS分析显示CWPO处理出水有机物种类明显减少,原水中主要有机污染物(酸类)大幅度降低,但可吸附有机卤素(AOX)较原水升高。根据原水及出水的主要氯代有机物,推测了CWPO处理出水中氯代副产物的生成途径,提出了减少或防止卤代副产物的调控措施,为环氧氯丙烷生产污水的高效处理、毒性控制及环境风险评估提供了理论依据和技术参考。

关键词: 环氧氯丙烷, 湿式催化过氧化氢氧化, 过硫酸盐高级氧化工艺, 急性毒性

Abstract:

Epichlorohydrin production wastewater is characterized by high organic content, high salinity, and poor biodegradability, making its treatment challenging. Thus developing efficient treatment processes is an urgent need. Advanced oxidation processes have great advantages in treating refractory organic compounds. This study optimized the process conditions of sulfate radical-based advanced oxidation processes (SAOPs) and catalytic wet peroxide oxidation (CWPO) for treating epichlorohydrin production wastewater. The treatment effects and effluent quality of the two advanced oxidation processes on epichlorohydrin production wastewater were compared, and the transformation characteristics of organic pollutants during the CWPO treatment process were analyzed at the molecular level using comprehensive two-dimensional gas chromatography-mass spectrometry (GC×GC-MS). The results showed that the optimal conditions for the CWPO process in treating epichlorohydrin production wastewater were pH=9.0, reaction temperature of 70 ℃, Mn-Ce/Al2O3 dosage of 20 g/L, m(H2O2)∶m(COD)=4∶1, and batch addition of H2O2. Under these conditions, after 80 minutes of reaction, the TOC removal rate reached 86.00%, the residual organic halogen content was 52.3 mg/L, and the acute toxicity value was 60.33%. The treatment effect was better than that of SAOPs. GC×GC-MS analysis showed that the types of organic compounds in the CWPO effluent were significantly reduced, and the main organic pollutants (acids) in the raw water were greatly decreased, while the absorbable organic halogen (AOX) increased compared to the raw water. Based on the major chlorinated organic compounds identified in the raw water and effluent, the generation pathways of chlorinated by-products in the CWPO effluent were inferred. Control measures to reduce or prevent the formation of halogenated by-products were proposed. This study provides a theoretical basis and technical reference for the efficient treatment, toxicity control, and environmental risk assessment of epichlorohydrin production wastewater and related industrial effluents.

Key words: epichlorohydrin, catalytic wet hydrogen peroxide oxidation, sulfate radical-based advanced oxidation processes, acute toxicity

中图分类号: