工业水处理 ›› 2002, Vol. 22 ›› Issue (7): 36-38. doi: 10.11894/1005-829x.2002.22.(7).36

• 分析与监测 • 上一篇    下一篇

谈混凝沉淀烧杯试验标准的编制

武道吉1, 谭风训2, 张华2   

  1. 1. 哈尔滨工业大学市政环境工程学院, 黑龙江哈尔滨 150090;
    2. 山东建筑工程学院环境工程系, 山东济南 250014
  • 收稿日期:2002-03-23 出版日期:2002-07-20 发布日期:2010-10-01
  • 作者简介:江霜英(1963- ), 1999 年获同济大学工学博士学位,副教授。联系电话: 021-65981794。

Standard for coagulation-flocculation and sedimentation beaker test

WU Daoji1, TAN Fengxun2, ZHANG Hua2   

  1. 1. School of Munic. and Environ. Eng., Harbin Institute of Tech., Harbin 150090, China;
    2. Dept. of Environ. Eng. Shandong Architectural and Civil Engineering Institute, Jinan 250014, China
  • Received:2002-03-23 Online:2002-07-20 Published:2010-10-01

摘要:

影响水的混凝效果因素众多,如 :浊度、色度、碱度和 pH等,难以直接确定合适的混凝剂及加注量,而混凝沉淀试验是对水的混凝沉淀研究及指导生产的最有效方法。文章介绍混凝沉淀试验标准编制宗旨、主要内容及有关问题的说明。

关键词: 混凝, 沉淀, 标准

Abstract:

The coag ulation effect of water is inf luenced by a number of factors and there is no way to determine the chemical dose needed according to the turbidity color alkalinity, or pH of the raw water. The beaker test is the most practical way to do coagulation-flocculat ion and sedimentation treatment research and to give direct ions in production. The compilation purpose, major contents and explanations of related questions of the standard for coagulation-flocculat ion and sedimentat ion beaker test are introduced.

Key words: coag ulation-flocculation, sedimentation, standard

中图分类号: