工业水处理 ›› 2004, Vol. 24 ›› Issue (9): 68-71. doi: 10.11894/1005-829x.2004.24(9).68

• 经验交流 • 上一篇    下一篇

抚顺洗涤剂化工厂废水处理工程设计

邹茂荣1, 彭永臻2, 李长青1, 高磊1   

  1. 1. 中油集团华东设计院, 山东青岛 266071;
    2. 北京工业大学能源与环境工程学院, 北京 100022
  • 收稿日期:2004-02-10 出版日期:2004-09-20 发布日期:2010-10-01
  • 作者简介:邹茂荣(1973- ),1996年毕业于哈尔滨建筑大学,2003年12月在哈工大获硕士学位,中国石油集团华东设计院系统室工程师.电话:0532-3893162(O),13606301223,E-mail:zoumaorong@cnpcedi.cn.
  • 基金资助:

    2003年国家环保局环境保护工程项目,编号GHJ2003036

Engineering design of Fushun chemical detergent plant wastewater treatment

Zou Maorong1, Peng Yongzhen2, Li Changqing1, Gao Lei1   

  1. 1. China Petroleum East China Design Institute, Qingdao 266071, China;
    2. Institute of Energy Sources and Environmental Engineering, Beijing University of Technology, Beijing 100022, China
  • Received:2004-02-10 Online:2004-09-20 Published:2010-10-01

摘要:

洗涤剂化工厂废水中含有大量的石油类、固体悬浮物(SS)、硫化物、酚及BOD、COD等有机污染物,采用隔油、涡凹气浮(CAF)、接触氧化、混凝沉淀、过滤、活性炭吸附等工艺处理后,出水达到循环水回用及生活杂用水水质标准。

关键词: 石油类, 硫化物, 涡凹气浮(CAF), 接触氧化, 过滤, 活性炭吸附

Abstract:

Wastewater from chemical detergent plants contains plenty of petroleum, suspended soild (SS), sulfide, hydroxybenzene, and organic pollutants as BOD and COD. After it′s treated by oil separation, cavitation air flotation(CAF), contact oxidation, coagulation precipitation, filtration, and activated carbon adsorption process, etc., the effluent can meet the water quality standard for non-drinking water and circulating water reuse.

Key words: petroleum, sulfide cavitation air flotation (CAF), contact oxidation, filtration, activated carbon adsorption

中图分类号: