工业水处理 ›› 2008, Vol. 28 ›› Issue (1): 88-90.

• 经验与交流 • 上一篇    下一篇

包装印刷废水处理工程

孙铁军1, 何洪林2   

  1. 1 天津市易玛尔环境工程有限公司天津 300402;
    2 北京剑平瑞华环保技术有限公司 北京 100020
  • 收稿日期:2007-07-17 修回日期:2007-07-17 出版日期:2008-01-20 发布日期:2010-10-01
  • 作者简介:孙铁军(1980-),2001年毕业于天津科技大学主要从事污水处理工艺方面的研究.电话:13920039848, E-mail:stone2004@yeah.net

Treatment project of baling printing wastewater

Sun Tiejun1, He Honglin2   

  1. 1. Tianjin Emir Environmental Engineering Co.,Ltd.,Tianjin 300402, China;
    2. Beijing Jianping Ruihua Environmental Technology Co.,Ltd.,Beijing 100020,China
  • Received:2007-07-17 Revised:2007-07-17 Online:2008-01-20 Published:2010-10-01

摘要:

天津市王朝包装印刷有限公司废水处理工程采用混凝沉淀—生物接触氧化组合工艺处理包装印刷废水,取得了很好的处理效果,其对废水中COD、BOD5、NH3-N、色度等污染指标的去除率均在90%以上。从工程验收完毕后两个多月的运行情况来看,系统运行稳定,出水优于相关排放标准。

关键词: 包装印刷废水, 混凝沉淀, 水解酸化, 生物曝气流化床

Abstract:

The coagulating sedimentation-biocatalytic oxidation combined technology has been introduced to the baling and printing wastewater treatment project, from which perfect effects are obtained. The removal rates of the COD,BOD5,NH3 - N,chroma and so on in the wastewater are all above 90%. Based on the operational aspect after finishing the checking and acceptance of this engineering for two months,the system runs steadily and the effluent is better than the relevant discharge standard.

Key words: baling and printing wastewater, coagulating sedimentation, hydrolyzing acidification, bio-aeratic fluidized, bed

中图分类号: