INDUSTRIAL WATER TREATMENT ›› 2014, Vol. 34 ›› Issue (12): 76-77. doi: 10.11894/1005-829x.2014.34(12).076

Previous Articles     Next Articles

Study on the synthesis and properties of PAFS

Bai Fengrong1,2, Li Zanzhong2, Liu Jinrong1   

  1. 1. College of Chemical Engineering, Inner Mongolia University of Technology, Hohhot 010051, China;
    2. Inner Mongolia Vocational College of Chemical Engineering, Hohhot 010070, China
  • Received:2014-10-30 Online:2014-12-20 Published:2015-01-14

聚合硫酸铝铁(PAFS)的合成及性能研究

白风荣1,2, 李赞忠2, 刘进荣1   

  1. 1. 内蒙古工业大学化工学院, 内蒙古 呼和浩特 010051;
    2. 内蒙古化工职业学院, 内蒙古 呼和浩特 010070
  • 作者简介:白风荣(1978-), 在读博士, 讲师, E-mail:bfengrong@126.com
  • 基金资助:

    内蒙古电力公司尧蒙能发电有限公司资助项目(2009-14)

Abstract:

The polymeric aluminum ferric sulphate(PAFS)has been prepared by using hematite as main raw material and extracting Al3+ and Fe3+ fromsulphuric acid. The product is characterized by X-Ray Diffraction(XRD), and transmission electron microscopy(TEM). The Yellow River water is used as raw water,and the flocculation experiment is conducted. The results show that the flocculation capability of home-made PAFS is superior to commercial poly-aluminum(PAC). When its dosage is 12 mg/L,and pH 5.0-8.5,the COD removing rate and turbidity removing rate can reach above 40%,and 99%,respectively.

Key words: hematite, polymeric aluminumferric sulphate, flocculation

摘要:

以赤铁矿为主要原料,用硫酸提取Al3+尧Fe3+制备了聚合硫酸铝铁(PAFS).产品采用XRD 及TEM进行表征,并以黄河水为原水进行絮凝实验研究.结果显示,自制PAFS 的絮凝性能优于市售聚铝(PAC),当其投加量为12mg/L、pH在5.0~8.5 时,COD去除率、浊度去除率分别达到40%尧99%以上.

关键词: 赤铁矿, 聚合硫酸铝铁, 絮凝

CLC Number: