消毒处理单元数值模拟的应用进展

doi:10.11894/iwt.2018-0995

摘要/Abstract

摘要： 消毒处理单元的设计对水处理工艺起着至关重要的作用。通过计算流体力学（CFD）设计模拟，可以提高消毒设计的有效性和消毒单元的处理效果。本研究分析了CFD对消毒池流场的模拟以及对池型设计、挡板设置、进出水方式等参数的优化方式，总结了采用CFD方法在消毒效果预测、消毒动力学耦合等方面的应用，并分析了其在紊流模型不确定性和多相流动的不准确性等方面存在的问题。最后，提出了提高设计模拟准确性的建议。

关键词: 计算流体力学, 模拟, 水处理, 消毒

Abstract: Disinfection treatment unit design significantly affects the quality of water treatment. The effectiveness of disinfection design can be improved by computational fluid dynamics(CFD). In this paper, CFD was used to simulate the flow field and optimize the parameters such as pool design and the inlet and outlet modes. Then this paper summarized the applications of CFD method in problems with prediction,disinfection dynamic coupling,turbulence model uncertainty,and inaccuracy of multiphase flow. Finally,suggestions for improving model accuracy and the application of CFD in disinfection design are put forward.

Key words: computational fluid dynamics, modeling, water treatment, disinfection

中图分类号:

X703

邸振华, 周律, 白昱. 消毒处理单元数值模拟的应用进展[J]. 工业水处理, 2019, 39(9): 24-27,110.

Di Zhenhua, Zhou Lü, Bai Yu. Numerical simulation of the design of disinfection treatment unit[J]. Industrial Water Treatment, 2019, 39(9): 24-27,110.

https://www.iwt.cn/CN/Y2019/V39/I9/24

参考文献

[1] Zhang J,Tejada A E,Zhang Q. Developments in computational fluid dynamics-based modeling for disinfection technologies over the last two decades:A review[J]. Environmental Modelling & Software, 2014,58(4):71-85.
[2] 李圭白. 水质工程学[M]. 北京:中国建筑工业出版社,2013:209-214.
[3] 李邵芬. 反应工程[M]. 北京:化学工业出版社,2000,102-133.
[4] Wols B A,Hofman J A M H,Beerendonk E F,et al. A systematic approach for the design of UV reactors using computational fluid dynamics[J]. AIChE Journal,2011,57(1):193-207.
[5] Haas C N,Joffe J. Disinfection under dynamic conditions:modification of hom's model for decay[J]. Environmental Science & Technology,1994,28(7):1367-1369.
[6] 张鸣远. 高等工程流体力学[M]. 北京:高等教育出版社,2012: 43-59.
[7] Janex M L,Savoye P,Do-Quang Z,et al. Impact of water quality and reactor hydrodynamics on wastewater disinfection by UV,use of CFD modeling for performance optimization[J]. Water Science and Technology,1998,38(6):71-78.
[8] Li H Y,Osman H,Kang C W,et al. Numerical and experimental investigation of UV disinfection for water treatment[J]. Applied Thermal Engineering,2017,111:280-291.
[9] Zhao X,Alpert S M,Ducoste J J. Assessing the impact of upstream hydraulics on the dose distribution of ultraviolet reactors using fluorescence microspheres and computational fluid dynamics[J]. Environmental Engineering Science,2009,26(5):947-959.
[10] Taghipour F,Sozzi A. Modeling and design of ultraviolet reactors for disinfection by-product precursor removal[J]. Desalination,2005, 176(1/2/3):71-80.
[11] Shilton A,Harrison J. Development of guidelines for improved hydraulic design of waste stabilisation ponds[J]. Water Science and Technology,2003,48(2):173-180.
[12] Kim D,Kim D I,Kim J H,et al. Large eddy simulation of flow and tracer transport in multichamber ozone contactors[J]. Journal of Environmental Engineering,2010,136(1):22-31.
[13] Amini R,Taghipour R,Mirgolbabaei H. Numerical assessment of hydrodynamic characteristics in chlorine contact tank[J]. International Journal for Numerical Methods in Fluids,2011,67(7):885-898.
[14] Lee S,Shin E,Kim S H,et al. Dead zone analysis for estimating hydraulic efficiency in rectangular disinfection chlorine contactors[J]. Environmental Engineering Science,2011,28(1):25-33.
[15] Zhang J,Tejada-Martínez A E,Zhang Q,et al. Evaluating hydraulic and disinfection efficiencies of a full-scale ozone contactor using a RANS-based modeling framework[J]. Water Research,2014,52:155-167.
[16] Choi J W,Kim S S,Park N S,et al. UV dose predictions for ultra violet flowing water purification of axial reactor type based on the location of the exit by CFD[J]. Journal of the Korean Society of Water and Wastewater,2012,26(4):521-533.
[17] Janex M L,Savoye P,Roustan M,et al. Wastewater disinfection by ozone:influence of water quality and kinetics modeling[J]. Ozone:Science & Engineering,2000,22(2):113-121.
[18] Samstag R W,Ducoste J J,Griborio A,et al. CFD for wastewater treatment:an overview[J]. Water Science and Technology,2016, 74(3):549-563.
[19] von Gunten U,Driedger A,Gallard H,et al. By-products formation during drinking water disinfection:a tool to assess disinfection efficiency?[J]. Water Research,2001,35(8):2095-2099.
[20] Xu C,Zhao X S,Rangaiah G P. Performance analysis of ultraviolet water disinfection reactors using computational fluid dynamics simulation[J]. Chemical Engineering Journal,2013,221:398-406.
[21] Chan S N,Qiao Q S,Lee J H W,et al. Modeling of mixing and rapid chlorine demand in sewage disinfection with dense chlorine jets[J]. Journal of Environmental Engineering,2017,143(11):7943-7880.
[22] Wols B A,Hofman J A M H,Uijttewaal W S J,et al. Evaluation of different disinfection calculation methods using CFD[J]. Environmental Modelling & Software,2010,25(4):573-582.
[23] Niazi S,Kalbasi M,Bahramian A. Hydraulic and disinfection efficiency of an ozonation contactor for a municipal water treatment plant using computational fluid dynamics[J]. The Canadian Journal of Chemical Engineering,2017,95(11):2063-2072.
[24] Li W T,Li M K,Bolton J R,et al. Impact of inner-wall reflection on UV reactor performance as evaluated by using computational fluid dynamics:The role of diffuse reflection[J]. Water Research,2017, 109:382-388.
[25] Gildeh H K,Mohammadian A,Nistor I,et al. Numerical modeling of turbulent buoyant wall jets in stationary ambient water[J]. Journal of Hydraulic Engineering,2014,140(6):213-226.
[26] Gandhi V,Roberts P J W,Stoesser T,et al. UV reactor flow visualization and mixing quantification using three-dimensional laser-induced fluorescence[J]. Water Research,2011,45(13):3855-3862.
[27] Han X S,Sagaut P,Lucor D. On sensitivity of RANS simulations to uncertain turbulent inflow conditions[J]. Computers & Fluids, 2012,61:2-5.
[28] Bak J G,Hwang W,Cho J. Geometry defeaturing effects in CFD model-based assessment of an open-channel-type UV wastewater disinfection system[J]. Water,2017,9(9):641.
[29] Saha R K,Zhang C,Ray M B. Similitude in an open-channel UV wastewater disinfection reactor[J]. Journal of Environmental Engineering,2015,141(3):0401-4065.
[30] Gagol M,Przyjazny A,Boczkaj G. Wastewater treatment by means of advanced oxidation processes based on cavitation-A review[J]. Chemical Engineering Journal,2018,338:599-627.
[31] Georgiadis N J,Rizzetta D P,Fureby C. Large-eddy simulation:current Capabilities,recommended Practices,and future research[J]. AIAA Journal,2010,48(8):1772-1784.
[32] Zhou L,Echigo S,Nakanishi T,et al. Development of a multiphase inactivation model for an advanced oxidation process and uncertainty analysis in quantitative microbial risk assessment[J]. Ozone Science & Engineering,2017,40(3):79-92.

选择文件类型/文献管理软件名称

选择包含的内容