工业水处理 ›› 2016, Vol. 36 ›› Issue (8): 101-103. doi: 10.11894/1005-829x.2016.36(8).101

• 工程实例 • 上一篇    下一篇

混凝沉淀-两级生化工艺处理印染废水

王洪涛, 李翠娥, 李太平, 王志清   

  1. 河南清水源科技股份有限公司, 河南济源 459000
  • 收稿日期:2016-07-22 出版日期:2016-08-20 发布日期:2016-08-26
  • 作者简介:王洪涛(1986-),硕士,工程师,E-mail:tao666tao666@163.com。

Engineering application of coagulation sedimentation-two stage biochemical process for treating dyeing wastewater

Wang Hongtao, Li Cuie, Li Taiping, Wang Zhiqing   

  1. Henan Qingshuiyuan Science & Technology Co., Ltd., Jiyuan 459000, China
  • Received:2016-07-22 Online:2016-08-20 Published:2016-08-26

摘要:

印染废水是当前难以处理的工业废水之一,其悬浮物、COD及色度等均较高。介绍了采用混凝沉淀-两级生化工艺处理印染废水的工程设计及运行效果。在进水COD、BOD5、色度、SS分别为2136、542 mg/L、480倍、400 mg/L的情况下,出水COD、BOD5、色度、SS分别为78、18 mg/L、40倍、46 mg/L,满足GB 4287-2012排放要求。

关键词: 印染废水, 混凝沉淀, 生化处理

Abstract:

At present printing and dyeing wastewater is one of industrial wastewater which is difficult to be treated. All of its SS,COD,chroma,etc. are rather high. An introduction to the engineering design and operation effect of coagulation sedimentation-two stage biochemical process used for treating dyeing wastewater has been made. When the influent COD,BOD5,chroma,and SS are 2 136,542 mg/L,480 times,and 400 mg/L,respectively,their effluent are 78,18 mg/L,40 times,and 46 mg/L,respectively,meeting discharge requirements of GB 4287-2012.

Key words: printing and dyeing wastewater, coagulation and sedimentation, biochemical treatment

中图分类号: