工业水处理 ›› 2004, Vol. 24 ›› Issue (10): 24-26. doi: 10.11894/1005-829x.2004.24(10).24

• 试验研究 • 上一篇    下一篇

电去离子净水设备的最佳工作参数

王方1, 杨斌斌2, 杨建永2, 侯普2   

  1. 1. 清华大学热能工程系, 北京 100084;
    2. 保定环工机械电子有限公司, 河北 保定 071000
  • 收稿日期:2004-04-07 出版日期:2004-10-20 发布日期:2010-10-01
  • 作者简介:王方(1938- ),1962年毕业于清华大学,教授,中国化工学会工业水处理专业委员会委员,本刊编委.电话:(010)62786321

Optimum working parameters of the electrodeionization

Wang Fang1, Yang Binbin2, Yang Jianyong2, Hou Pu2   

  1. 1. Departmant of Thermal Engineering, Tsinghua University, Beijing 100084, China;
    2. Baoding Huangong Machinery & Electron Co., Ltd., Baoding 071000, China
  • Received:2004-04-07 Online:2004-10-20 Published:2010-10-01

摘要:

通过对1t/h电去离子(EDI)净水设备的实验研究,得出确定其最佳工作参数的方法。介绍实验得出的EDI净水设备的电压-电流曲线和电流与产水电阻率曲线,依据这些曲线来确定EDI净水设备的极限电流密度和最佳工作参数,方便、可靠、形象、直观,且较简单。

关键词: 电去离子, 电渗析, 高纯水

Abstract:

Based on the study of a 1 t/h EDI, the method of optimum working parameters of the EDI is obtained. This paper introduces the curves voltage - current and current - resistivity of producing water, obtained from the experiment. According to these curves, a method of defining the limiting current density and optimum working parameters of the EDI is presented, which is more convenient and more reliable, more image and more audio-visual, more simple and more quick.

Key words: electrodeionization, electrodialysis, high-purity water

中图分类号: