工业水处理 ›› 2009, Vol. 29 ›› Issue (10): 33-35. doi: 10.11894/1005-829x.2009.29(10).33

• 试验研究 • 上一篇    下一篇

破乳法预处理平整液废水的试验研究

孙东军1, 邱兆富1, 侯红娟2, 李恩超2, 王晓霞1, 吕树光1   

  1. 1. 华东理工大学资源与环境工程学院, 上海 200237;

    2. 宝钢研究院环境与资源研究所, 上海 201900
  • 收稿日期:2009-05-05 修回日期:2009-05-05 出版日期:2009-10-20 发布日期:2010-10-01
  • 作者简介:孙东军(1984- ),2007年毕业于河北科技大学,在读硕士研究生。电话:15901619697,E-mail:shuanglai16888@163.com。通讯联系人:邱兆富,E-mail:zfqiu@ecust.edu.cn。

Pretreatment of emulsion wastewater discharged from cold rolling mill by demulsification method

Sun Dongjun1, Qiu Zhaofu1, Hou Hongjuan2, Li Enchao2, Wang Xiaoxia1, Lü Shuguang1   

  1. 1. College of Resource and Environmental Engineering, East China University of Science and Technology, Shanghai 200237, China;
    2. Institute of Environment and Resources, Baoshan Iron & Steel Co., Ltd., Shanghai 201900, China
  • Received:2009-05-05 Revised:2009-05-05 Online:2009-10-20 Published:2010-10-01

摘要:

对模拟高污染平整液废水进行硫酸破乳和投加混凝剂(硫酸亚铁、硫酸铝、三氯化铝、聚合氯化铝、聚合硫酸铁)破乳试验。结果表明:采用硫酸破乳和混凝剂破乳均可以达到较好的处理效果,CODCr和石油类的去除率分别在69%和93%以上,处理后的水BOD5/CODCr>0.3,可以满足后续的生化处理要求。

关键词: 平整液废水, 破乳, 混凝, 废水处理

Abstract:

Sulfuric acid and coagulants (ferrous sulfate, aluminum sulfate, aluminum chloride, PAC, PFS) have been used for the pretreatment of emulsion wastewater discharged from cold rolling mill by the demulsification process. The results show that good effect can be obtained by using both sulfuric acid demulsification and coagulant demulsification. The removal rates of CODCr and oil are over 69% and 93%, and BOD5/CODCr of the treated effluent are all higher than 0.3, indicating that it can meet the requirements of the following biochemical treatment.

Key words: cold rolling wastewater, demulsification, coagulation, wastewater treatment

中图分类号: