工业水处理

• 经验交流 • 上一篇    下一篇

加工高硫原油产生污水的性质及其处理工艺

巫明娟, 卞玉涛   

  1. 中海油(青岛)重质油加工工程技术研究中心有限公司,山东青岛266500
  • 收稿日期:2012-12-04 修回日期:2012-12-04 出版日期:2013-02-20 发布日期:2013-03-01
  • 作者简介:巫明娟(1985-),硕士。 E-mail:wumingjuan1@sina.com。

Research on the characteristic of wastewater from high-sulfur crude oil processing and its treatment technology

Wu Mingjuan, Bian Yutao   

  1. Engineering Research Center of Heavy Oil Processing Co.,Ltd.,CNOOC,Qingdao266500,China
  • Received:2012-12-04 Revised:2012-12-04 Online:2013-02-20 Published:2013-03-01

摘要:

对加西原油加工过程产生污水的性质进行分析,该污水具有pH大、硫化物含量低、氨氮含量低、含油量低、COD含量高的特点。在污水处理场原有设施上,通过调节pH、增加絮凝剂投加量、增加生化池葡萄糖投加量、调节生化池温度等措施,使加西原油加工期间所产生的污水全部达标排放。

关键词: 高硫原油加工废水, 气浮, 生化处理

Abstract:

Based on the processing of Western Canada crude oil in a refinery,the properties of the industrial wastewater generated during the processing course are analyzed.The wastewater is characterized by high pH,low sulfide content,low ammonia-nitrogen content,low oil content,and high COD content.It is found that by using the original facilities in the wastewater treatment plant,all of the wastewater generated during the course of high-sulfur Western Canada crude oil processing reaches the emission standard,through adjusting the pH,increasing flocculent dosage and glucose dosage in biochemical pool,and adjusting the temperature of biochemical pool.

Key words: high-sulfur crude oil processing wastewater, flotation, biochemical treatment

中图分类号: