工业水处理 ›› 2018, Vol. 38 ›› Issue (10): 33-36. doi: 10.11894/1005-829x.2018.38(10).033

• 试验研究 • 上一篇    下一篇

磁性羧甲基纤维素纳米粒子吸附铜离子研究

王丽聪1,2, 曹玉华1   

  1. 1. 江南大学化学与材料工程学院, 江苏无锡 214122;
    2. 江阴职业技术学院化纺系, 江苏江阴 214405
  • 收稿日期:2018-06-27 出版日期:2018-10-20 发布日期:2018-10-29
  • 通讯作者: 曹玉华,E-mail:yuhuacao64@gmail.com。
  • 作者简介:王丽聪(1979-),博士研究生。电话:0510-86022663,E-mail:licong_wang@163.com。
  • 基金资助:
    食品胶体与生物技术教育部重点实验室项目(Grant No.JDSJ2013-03)资助

Research on magnetic carboxymethyl cellulose nanoparticles for the adsorption of copper ions

Wang Licong1,2, Cao Yuhua1   

  1. 1. School of Chemical and Material Engineering, Jiangnan University, Wuxi 214122, China;
    2. Department of Chemical and Textile Engineering, Jiangyin Polytechnic College, Jiangyin 214405, China
  • Received:2018-06-27 Online:2018-10-20 Published:2018-10-29

摘要: 采用共沉淀法制备了磁性羧甲基纤维素纳米粒子(CMC@Fe3O4),利用TEM、FTIR和VSM等手段对制备的CMC@Fe3O4进行了表征,探讨了CMC的最佳用量,并进行了吸附Cu2+性能研究。结果表明,CMC成功包覆在Fe3O4外层,制备的CMC@Fe3O4对Cu2+的最大吸附量为41.62 mg/g。CMC@Fe3O4对Cu2+的吸附较好地满足Langmuir方程,吸附过程可以用准二级动力学方程描述。

关键词: 羧甲基纤维素钠, 磁性纳米粒子, 吸附, 铜离子

Abstract: Magnetic carboxymethyl cellulose nano-particles(CMC@Fe3O4) have been prepared by co-precipitation method,the prepared CMC@Fe3O4 characterized by means of transmission electron microscopy,Fourier transform infrared spectroscopy and vibrating sample magnetometer,the optimal dosage of CMC discussed,and their adsorption capability for Cu2+ investigated. The results show that CMC can successfully be coated on the outer layer of Fe3O4. The maximum adsorption capacity of CMC@Fe3O4 for Cu2+ is 41.62 mg/g. The CMC@Fe3O4 adsorption for Cu2+ complies with the Langmuir equation quite well,and the adsorption process can be described by pseudo-second-order kinetic equation.

Key words: carboxymethyl cellulose, magnetic nano-particles, adsorption, copper ions

中图分类号: